HLMP-P105 Subminiature LED Lamps
Flat Top PackageThe HLMP-P105 Series flat top lamps use an untinted, non-diffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications.Lead ConfigurationsAll of these devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps datasheet.
Features- Subminiature Flat Top Package
Ideal for Backlighting and Light Piping Applications
- Ideal for Space Limited Applications
- Axial Leads
- Available with Lead Configurations for Surface Mount and Through Hole PC Board Mounting
| | Specification | Value |
|---|
| Lifecycle | Active | | Distrib. Inventory | Yes | | Samples Available | Yes | | Color | Red | | Color Bin Selection | Open | | Dimension Lxwxh In Mm | 2.2 x 2.1 x 2.2 | | Intensity Bin Selection | Open | | RoHS6 Compliant | Y | | Max Qty of Samples | 20 | | Minimum Luminous Intensity (mcd) | 8.6 | | Number Of Colors | Single | | Package | Flat Top Subminiature | | Test Current (mA) | 20.0 | | Typical Dominant Wavelength (nm) | 637 | | Typical Luminous Intensity (mcd) | 30 | | Viewing Angle (degree) | 125° |
|
Application Brief (5)
Application Note (4)
Data Sheet (2)
- HLMP-Pxxx, HLMP-Qxxx, HLMP-6xxx, HLMP-70xx Series Subminiature LED Lamps.pdf（12/12/2014）
- Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S, Standard SMT Through Hole Lead Bend Options for Subminiature LED.pdf（09/02/2008）
Product Change Notice (PCN) (2)
Reliability Data Sheet (1)
