ZXLD1615Q：LED Drivers for Displays / Backlights
| Part Number | Data Sheet | SPICE Model | Function | MinimumInput Voltage (V) | MaximumInput Voltage (V) | Maximum Output Voltage (V) | Number of Regulated Output Channels | Maximum Output Current per Channel (mA) | Typical Over-Current Protection Current (mA) | Switching Frequency (MHz) | Efficiency (%) | Quiescent Current (mA) | Standby Quiescent Current (µA) | SW RDS(ON) (Ω) | Dimming | OVP | Soft Start | VFB (V) | OperatingTemperatureRange (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZXLD1615Q | ZXLD1615Q.pdf | - | LCD/OLED Bias Generator | 2.7 | 5.5 | 28 | 1 | - | 320 | 0.35 | 0.35 | 0.06 | 1 | 1.75 | - | No | No | 1.25 | -40 to +85 |
Description
The ZXLD1615Q is a PFM inductive-boost-converter designed to provide output voltages of up to 28V from a 2.5V to 5.5V input supply.
The ZXLD1615Q includes the output switch and peak current sense resistor, and can provide up to 10mA output current at maximum output voltage. Higher current is available at lower output voltages.
Quiescent current is typically 60µA and a shutdown function is provided to reduce this current to less.
Nominal output voltage can be set up to a maximum of 28V by two external resistors and can be adjusted to lower values by a PWM control signal applied to the 'Enable' pin. Depending upon the control frequency, the PWM signal will provide either continuous (low ripple) or gated control. The PWM filter components are contained within the chip. Minimum output voltage is determined by the input supply.
The device is assembled in a low profile TSOT25 package.
The ZXLD1615Q has been qualified to AEC-Q100 Grade 3 and is Automotive Compliant supporting PPAPs.
Application
- Automotive LCD Panels
Features
- Internal PWM Filter for Adjustable Output
- High Efficiency (85% typ)
- Wide Input Voltage Range: 2.5V to 5.5V
- Up to 250mA Output Current at 5V
- Low 60µA Quiescent Current
- 100nA Maximum Shutdown Current
- Up to 1MHz Switching Frequency
- Low External Component Count
- Green Molding in Small Package TSOT25
- Totally Lead-free & Fully RoHS Compliant
- Halogen and Antimony Free. “Green” Device
- Automotive Compliant
- Qualified to AEC-Q100 Grade 3
- Supports PPAP Documents
TSOT25
- ZXLD1615Q.pdf ZXLD1615Q
