FAN3213T_F085: Dual-4 A, High-Speed,Low-Side Gate Driver

The FAN3213 and FAN3214 dual 4 A gate drivers are designed to drive N-channel enhancement-mode MOSFETs in low-side switching applications by providing high peak current pulses during the short switching intervals. They are both available with TTL input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output LOW until the supply voltage is within the operating range. In addition, the drivers feature matched internal propagation delays between A and B channels for applications requiring dual gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two drivers in parallel to effectively double the current capability driving a single MOSFET.The FAN3213/14 drivers incorporate MillerDrive™ architecture for the final output stage. This bipolar-MOSFET combination provides high current during the Miller plateau stage of the MOSFET turn-on / turn-off process to minimize switching loss, while providing rail-to-rail voltage swing and reverse current capability.The FAN3213 offers two inverting drivers and the FAN3214 offers two non-inverting drivers. Both are offered in a standard 8-pin SOIC package.

Features

• Industry-Standard Pin out
  
• 4.5 to 18V Operating Range
  
• 5A Peak Sink/Source at V_DD = 12V
  
• 4.3A Sink / 2.8A Source at V_OUT = 6V
  
• TTL Input Thresholds
  
• Two Versions of Dual Independent Drivers:
  - Dual Inverting (FAN3213)
  - Dual Non-Inverting (FAN3214)
  
• Internal Resistors Turn Driver Off If No Inputs
  
• MillerDrive™ Technology
  
• 12ns / 9ns Typical Rise/Fall Times with 2.2nF Load
  
• Typical Propagation Delay Under 20ns Matched within 1ns to the Other Channel
  
• Double Current Capability by Paralleling Channels
  
• Standard SOIC-8 Package
  
• Rated from –40°C to +125°C Ambient
  
• Automotive Qualified to AEC-Q100 (F085 Version)
  

Application Notes