- 简体中文
- English
FPF1008: IntelliMAX™ Advanced Load Products
The FPF1007/8/9 are low RDS P-Channel MOSFET load switches offered in a selection of 10µs, 80µs, and 1ms slew rate turn-on options for transient/inrush current control. To support trends in mobile application requirements, the minimum operating input voltage has been reduced down to 1.2V, the input current leakage has been minimized to extend battery life, and the ESD-protection has been designed to withstand a minimum of 8kV (HBM) and 2kV (CDM).
The switch is controlled by an active-high logic input (ON pin), allowing it to interface directly with a low-voltage control signal. An internal ON pin pull-down resistor protects against an unintentional device turn-on while in the initial state. An on-chip pull-down resistor on the output is enabled when the switch is turned-off and provides a quick and robust discharge of the output load.
| FPF1008 Datasheet |
Features
- 1.2 to 5.5V Input Voltage Range
- Typical RON = 30 mΩ @ VIN = 5.5V
- Typical RON = 40 mΩ @ VIN = 3.3V
- Fixed Three Different Turn-on Rise-time 10µs/80µs/1ms
- Low < 10µA @ VIN = 3.3V Quiescent Current
- Internal ON Pin Pull Down
- Output Discharge Function
- ESD Protection above 8000V HBM and 2000V CDM
- RoHS compliant
| Product | Product & Eco Status | Unit Price/1K Order | Packing Method Convention | Package Marking Convention* |
|---|---|---|---|---|
| FPF1008 | Full Production Green as of May 2007 China RoHS | $0.442 | MLP 2x2 6L
-
0.8 x 2 x 2mm,
TAPE REEL
| Line 1&Z (Plant Code) &2 (2-Digit Date Code) &K
Line 2008 |
Application Notes
- MLP 2x2 6L Drawing Last Update: May 2014
- MLP06 Packing Drawing Last Update: Oct 2015
- Assembly Guidelines for MicroFET-6 Packaging Last Update : 05-Mar-2011
