FXL6408: Fully Configurable 8-Bit I2C-Controlled GPIO Expander

The FXL6408 is an 8-bit I2C-controlled GPIO expander. When configured in Input Mode, the FXL6408 monitors the input ports for data transitions and signals the baseband by asserting the /INT pin. The input default values can be programmed independently, allowing customized input detection. All inputs can be configured with pull-up or pull-down resistors to pre-bias the inputs in open-drain or non-driven applications. When configured in Output Mode, the GPIO pins are capable of delivering 6 mA output drive according to the I2C register set. The FXL6408 is designed to allow voltage translation from levels as low as 1.65 V and up to 4.0 V. The FXL6408 features an active LOW RESET input as well as Power-On Reset (POR) circuit and I2C software reset options.

Features

• 4X Expansion of Connected Processor I/O Ports
• Fully Integrated I²C Slave
• 8 Independently Configurable I/O Ports
• Low-Power Quiescent Current: 1.5 µA
• Voltage Translation Capable from 1.65 V I²C Port Up to 4.0 V GPIO Pins
• Selectable Device Address
• 6 mA Output Drive
• Interrupt Pin to Alert Processor of Status Changes