| Parametric | TLE9262-3QX |
|---|
| Transceiver | 1 x LIN2.2 / J2602 |
|---|
| Transceiver | High Speed CAN ISO 11898 - 6 |
|---|
| Transmission Rate
max | 2.0MBit/s |
|---|
| Voltage Regulator Output | 5V / 250 mA |
|---|
| Voltage Regulator Output | 5V / 100 mA |
|---|
| Voltage Regulator Output | 5V or 3.3V / 400 mA |
|---|
| Output Drivers | 4 x High-Side Switch 150 mA |
|---|
| Failure Management | 3 x Limp-Home Outputs |
|---|
| Failure Management | CAN Failure Detection |
|---|
| Failure Management | Fail-Safe Mode |
|---|
| Quiescent Current | 15 μA (typ) Sleep Mode (5V off) |
|---|
| Standby Current | 44 μA (typ) Stop Mode (5V on) |
|---|
| Wake-up Inputs | Wake Pins, CAN, LIN |
|---|
| Family | Mid-Range SBC |
|---|
| Sales Product Name | TLE9262-3QX |
|---|
| OPN | TLE92623QXXUMA2 |
|---|
| Product Status | active and preferred |
|---|
| Package Name | PG-VQFN-48 |
|---|
| Completely lead free | yes |
|---|
| Halogen free | yes |
|---|
| RoHS compliant | yes |
|---|
| Packing Size | 2500 |
|---|
| Packing Type | TAPE & REEL |
|---|
| Moisture Level | 3 |
|---|
| Summary of Features:- Very low quiescent current consumption in Stop- and Sleep Mode
- Periodic Cyclic Wake in SBC Normal- and Stop Mode
- Periodic Cyclic Sense in SBC Normal-, Stop- and Sleep Mode
- Low-Drop Voltage Regulator 5V, 250mA
- Low-Drop Voltage Regulator 5V, 100mA, protected features for off-board usage
- Low-Drop Voltage Regulator, driving an external PNP transistor - 5V in load sharing configuration or 5V/3.3V in stand-alone configuration, protected features for off-board usage. Current limitation by shunt resistor (up to 350mA with 470mΩ external shunt resistor) in stand-alone configuration
- High-Speed CAN Transceiver:
fully compliant to ISO11898-2 and ISO11898-5
fully compliant to ISO11898-6 (Partial Networking) inclunding CAN FD tolerant feature
suitable for chokeless operation up to 500kbps
supporting CAN FD communication up to 2 Mbps
- fully compliant to ISO11898-2 and ISO11898-5
- fully compliant to ISO11898-6 (Partial Networking) inclunding CAN FD tolerant feature
- suitable for chokeless operation up to 500kbps
- supporting CAN FD communication up to 2 Mbps
- LIN Transceiver LIN 2.2, J2602 with configurable TXD timeout feature and LIN Flash Mode
- Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04
- Four High-Side Outputs 7Ω typ.
- Dedicated supply pin for High-Side Outputs
- Two General Purpose High-Voltage In- and Outputs (GPIOs) configurable as add. Fail Outputs, Wake Inputs, Low-Side switches or High-Side switches
- Three universal High-Voltage Wake Inputs for voltage level monitoring
- Alternate High-Voltage Measurement Function, e.g. for battery voltage sensing
- Configurable wake-up sources
- Reset Output
- Configurable timeout and window watchdog
- Up to three Fail Outputs (depending on configuration)
- Over temperature and short circuit protection feature
- Wide supply input voltage and temperature range
- Software compatible to all
- SBC families TLE926x and TLE927x
- Green Product (RoHS compliant) & AEC Qualified
- PG-VQFN-48 leadless exposed-pad power package with Lead Tip Inspection (LTI) feature to support Automatic Optical Inspection (AOI)
Target Applications:- Body control modules
- Gateway
- Climate control
- Seat control
- Door control and closures
- Light control modules
- Engine management systems
 |
