| KIT_AK_2MOTORDRIVE_V1 | Microcontroller | XC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23V–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Simultaneous control of two PMSMs with sensorless FOC & digital PFC with XE164. Sensorless FOC & digital PFC with XC878. V/f control of ACIM for quick evaluation.XC878XE164F | on request |
| KIT_AK_DAVEDRIVE_V3 | Microcontroller | Scalable low voltage PMSM motor driver kit with DAVE™ Drive auto code generator. Uses the full power of Infineon microcontrollers, e.g. it generates optimized FOC code for XC878 using a vector computer and XE164 with MAC unit supporting single cycle 16 x 16-bit multiplication and accumulation. This usually requires expert knowledge in both motor control and assembler programming.XC878XE164 | active and preferred |
| KIT_AK_FOCDRIVE_V1 | Microcontroller | XC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23V–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Sensorless FOC of PMSM with XE164. Sensorless FOC of PMSM with XC878.XC878XE164F | active and preferred |
| KIT_XC878_EK_V1 | Microcontroller | For evaluation of XC864/XC878 including documentation, compiler, debugger, operating system, parallel cable and one extension board.XC864XC878 | discontinued |
| KIT_AK_3PHASE_DRIVE_V1 | Microcontroller | 3-phase drive application kit: 0.75kW power stage for consumer and industrial drives, XC886 motor control unit with molded CIPOS™ module and integrated AC/DC converter. Seperately application kit for PMSM/BLDC and induction motors (110V and 220V).XC886 | active and preferred |
| KIT_AK_XC800_FOC_V1 | Microcontroller | Field Oriented Control (FOC) evaluation kit based on XC886/888 including documentation, ready-to-use FOC software, compiler, debugger, USB-CAN interface, DAVE™ mother system and a 24V PMSM motor.XC886 | active and preferred |
| KIT_AK_BLDC_MDB_V1 | Microcontroller | Motor control demo kit for block commutation (20 ~ 45V, 0 ~ 16A) on BLDC motors.XC866 | active and preferred |
| KIT_AK_XC866_BLDC | Microcontroller | 12V BLDC (brushless DC) automotive application kit: pp to 20A BLDC motor, inverter, MCU (XC866). Free compiler (SDCC) and debugger (HITOP). Tutorial videos demonstrating how to use the kit.XC866 | active and preferred |
| KIT_AK_XC866_LIN_STEPPER | Microcontroller | XC866 LIN stepper motor kit: to jump start stepper motor design and provide an introduction to the Local Interconnect Network (LIN) protocol, Infineon offers the XC866 LIN stepper motor application kit.XC866 | active and preferred |
| KIT_AK_INTOUCH | Microcontroller | The Kit is built around Infineon’s new XC836T 8-bit microcontroller and is a combined control solution for capacitive touch buttons and LED-display functionality. The sensing sensitivity is adjusted to work with a 2mm acrylic glass cover mounted on the substrate.XC836 | active and preferred |
| KIT_AK_INTOUCH16B | Microcontroller | The inTouch Application Kit is a comprehensive set of hardware and software reference designs for touch sensing and LED display solutions with XC836T.XC836 | active and preferred |
| KIT_XC836_EK_V1 | Microcontroller | For evaluation of XC835 and XC836 microcontrollers; including USB cable, capacitive touch pads, LED display and CD-ROM with technical documentation (user manual, data sheets, board documentation, Errata sheets), DAVE™ Bench free development tool chain (compiler, debugger, flash loader) and application code examples with hands on trainings.XC835XC836 | active and preferred |
| KIT_XC822_XC836_DALI | Microcontroller | "DALI PHY connector provides a physical interface to DALI networks and can be plugged onto our XC82x- and XC83x-Easykit to build and configure a physical DALI network. "XC822XC836 | active and preferred |
| KIT_AK_INTOUCHIR | Microcontroller | The IR Remote Control Kit is a re-programable remote control solution
based on RC-5 standard.
A modular kit with a transceiver panel and a receiver board
features a combination of capacitive touch control and IR communication, building on Infineon's new XC822 microcontrollerXC822 | active and preferred |
| KIT_XC822_EK_V1 | Microcontroller | For evaluation of XC822 microcontroller; including USB cable, high power LED module, boost converter, capacitive touch pads and CD-ROM with technical documentation (user manual, data sheets, board documentation, Errata sheets), DAVE™ Bench free development tool chain (compiler, debugger, flash loader) and application code examples with hands on trainings.XC822 | active and preferred |
