The ISL1557A is a dual operational amplifier designed for VDSL2 and ADSL line driving in DMT based solutions. This device features a high drive capability of 750mA while consuming only 6mA of supply current per amplifier and operating from a single 4.5V to 12V supply. The driver achieves a typical distortion of -80dBc, at 150kHz into a 25Ω load. ISL1557A is design with stronger output clamps to enhance protection against lightning transients.
The ISL1557A is available in the thermally-enhanced 16 Ld QFN and 10 Ld HMSOP package and is specified for operation over the full -40°C to +85°C temperature range. The ISL1557A has control pins C0 and C1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application.
The ISL1557A is ideal for ADSL2+, SDSL, HDSL2 and VDSL line driving applications, including both 14.5dBm and 21dBm applications.
Key Features
- 21dBm output power capability
- Drives up to 750mA from a +12V supply
- 20VP-P differential output drive into 21Ω
- -80dBc typical driver output distortion at full output at 150kHz
- -75dBc typical driver output distortion at 4MHz
- -82dBc typical driver output distortion at 10MHz
- -79dBc typical driver output distortion at 17MHz
- Low quiescent current of 6mA per amplifier
- Supply range
- For ISL1557AIUEZ 4.5V to 12V
- For ISL1557AIRZ ±2.25V to ±6V, 4.5V to 12V
- 300MHz bandwidth
- Thermal shutdown
- Pb-free (RoHS compliant)
Applications
- VDSL2 line drivers
- ADSL2+ CPE line driving
- G.SHDSL, HDSL2 line drivers
Order Information| Part Number | Package Type | Weight(g) | Pins | MSL Rating | Peak Temp (°C) | RoHS Status |
|---|
|
| ISL1557AIRZ | 16 Ld QFN | 0.043 | 16 | 3 | 260 | RoHS |
|
|
| ISL1557AIRZ-T7 | 16 Ld QFN T+R | 0.043 | 16 | 3 | 260 | RoHS |
|
|
| ISL1557AIUEZ | 10 Ld MSOP | 0.025 | 10 | 3 | 260 | RoHS |
|
|
| ISL1557AIUEZ-T7 | 10 Ld MSOP T+R | 0.025 | 10 | 3 | 260 | RoHS |
|
|
