ISL28291: Dual Supply Ultra-Low Noise, Low Distortion Rail-to-Rail Output, Op Amp

The ISL28191 and ISL28291 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers. They are fully specified to operate down to +3V single supply. These amplifiers have outputs that swing rail-to-rail and an input common mode voltage that extends to ground(ground sensing).

The ISL28191 and ISL28291 are unity gain stable with an input referred voltage noise of 1.7nV/√Hz. Both parts feature 0.00018% THD+N at 1kHz.

The ISL28191 is available in the space-saving 6 Ld UTDFN (1.6mmx1.6mm) and 6 Ld SOT-23 packages. The ISL28291 is available in the 8 Ld SOIC, 10 Ld 1.8mmx1.4mm UTQFN and 10 Ld MSOP packages. All devices are guaranteed over -40°C to +125°C.

Key Features
  • 1.7nV/√Hz input voltage noise at 1kHz
  • 1kHz THD+N typical 0.00018% at 2VP-P VOUT
  • Harmonic Distortion -76dBc, -70dBc, fo = 1MHz
  • 61MHz -3dB bandwidth
  • 630µV maximum offset voltage
  • 3µA input bias current
  • 100dB typical CMRR
  • 3V to 5.5V single supply voltage range
  • Rail-to-rail output
  • Ground Sensing
  • Enable pin (not available in the 8 Ld SOIC package option)
  • Pb-free (RoHS compliant)
Applications
  • Low noise signal processing
  • Low noise microphones/preamplifiers
  • ADC buffers
  • DAC output amplifiers
  • Digital scales
  • Strain gauges/sensor amplifiers
  • Radio systems
  • Portable equipment
  • Infrared detectors
Typical Diagram
Application Notes
TitleTypeUpdatedSizeOther Languages
AN1652: iSim:PE Users GuidePDF13 Nov 20141.45 MB
AN1613: From SPICE Netlist to Allegro Design Sub-circuitPDF13 Nov 2014925 KB
AN1560: Making Accurate Voltage Noise and Current Noise Measurements on Operational Amplifiers Down to 0.1HzPDF13 Nov 20141.8 MB
AN1561: Radiated Interference in Audio CircuitsPDF13 Nov 2014370 KB
AN1556: Building an Accurate SPICE Model for Low Noise, Low Power Precision AmplifiersPDF13 Nov 2014866 KB
AN1548: Manual for the iSim Active Filter DesignerPDF13 Nov 20146.5 MB
AN1299: Measuring RF Interference in Audio CircuitsPDF13 Nov 2014366 KB
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL28191, ISL28291 DatasheetPDF17 Nov 20141.58 MB
User Guides
TitleTypeUpdatedSizeOther Languages
ISL2829xEVAL1Z, ISL5529xEVAL1Z User GuidePDF13 Nov 2014346 KB
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL28291FBZ8 Ld SOIC0.07283260RoHS
ISL28291FBZ-T78 Ld SOIC T+R0.07283260RoHS
ISL28291FRUZ-T710 Ld uTQFN T+R0.0035103260RoHS
ISL28291FUZ10 Ld MSOP0.026102260RoHS
ISL28291FUZ-T710 Ld MSOP T+R0.026102260RoHS
ISL28291EVAL1ZN/ARoHS
ISL28191, ISL28291 Datasheet 17 Nov 2014
8 Ld SOIC T+R ISL1208
10 Ld uTQFN T+R ISL54060
10 Ld MSOP T+R EL7515
ISL28191, ISL28291 Macromodel 31 Oct 2014
ISL28191
AN1652: iSim:PE Users Guide 13 Nov 2014
AN1613: From SPICE Netlist to Allegro Design Sub-circuit 13 Nov 2014
AN1560: Making Accurate Voltage Noise and Current Noise Measurements on Operational Amplifiers Down to 0.1Hz 13 Nov 2014
AN1561: Radiated Interference in Audio Circuits 13 Nov 2014
AN1556: Building an Accurate SPICE Model for Low Noise, Low Power Precision Amplifiers 13 Nov 2014
AN1548: Manual for the iSim Active Filter Designer 13 Nov 2014
AN1299: Measuring RF Interference in Audio Circuits 13 Nov 2014
ISL2829xEVAL1Z, ISL5529xEVAL1Z User Guide 13 Nov 2014