ISL7457SRH: Radiation Hardened, SEE Hardened, Non-Inverting, Quad CMOS Driver

The ISL7457SRH is a radiation hardened, SEE hardened, high speed, non-inverting, quad CMOS driver. It is capable of running at clock rates up to 40MHz and features 2A typical peak drive capability and a nominal On-resistance of just 3.5Ω. The ISL7457SRH is ideal for driving highly capacitive loads, such as storage and vertical clocks in CCD applications. It is also well suited to level-shifting and clock-driving applications.Each output of the ISL7457SRH can be switched to either the high (VH) or low (VL) supply pins, depending on the related input pin. The inputs are compatible with both 3.3V and 5V CMOS logic. The output enable (OE) pin can be used to put the outputs into a high-impedance state. This is especially useful in CCD applications, where the driver should be disabled during power-down.

The ISL7457SRH also features very fast rise and fall times, which are typically matched to within 1ns. The propagation delay is also matched between rising and falling edges to typically within 1.5ns.

The ISL7457SRH is available in a 16 Ld ceramic flatpack package and specified for operation over the full -55°C to +125°C ambient temperature range.

Key Features
  • Electrically screened to SMD 5962-08230
  • QML qualified per MIL-PRF-38535 requirements
  • Full mil-temp range operation: TA = -55°C to +125°C
  • Radiation hardness
    • TID [50-300 rad(Si)/s]: 10krad(Si) min
  • SEE hardness
    • LET (SEL and SEB Immunity): 40MeV/mg/cm2 min
    • LET [SET = ΔVOUT < 15V, Δt < 500ns]: 40MeV/mg/cm2
  • 4 Channels
  • Clocking speeds up to 40MHz
  • 11ns/12ns typical tR/tF with 1nF Load (15V bias)
  • 1ns typical rise and fall time match (15V bias)
  • 1.5ns typical prop delay match (15V bias)
  • Low quiescent current - < 1mA Typical
  • Fast output enable function - 12ns typical (15V bias)
  • Wide output voltage range
    • 0V ≤ VL ≤ 8V
    • 2.5V ≤ VH ≤ 16.5V
  • 2A typical peak drive current (15V Bias)
  • 3.5Ω typical on-resistance (15V bias)
  • Input level shifters
  • 3.3V/5V CMOS compatible inputs
Applications
  • CCD Drivers, Clock/line Drivers, Level-Shifters
Typical Diagram
Application Notes
TitleTypeUpdatedSizeOther Languages
AN9867: End of Life Derating: A Necessity or Over KillPDF13 Nov 201435 KB
AN1458: Extending the TID Capability of the ISL7457SRHPDF13 Nov 201473 KB
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL7457SRH DatasheetPDF19 Oct 2016408 KB
Standard Microcircuit Drawings
TitleTypeUpdatedSizeOther Languages
SMD 5962-08230 (ISL7457SRH)PDF12 Jan 2015
Test Reports
TitleTypeUpdatedSizeOther Languages
ISL7457SRH SEE Test ReportPDF17 Nov 2014177 KB
Miscellaneous
TitleTypeUpdatedSizeOther Languages
Intersil Commercial Lab ServicesPDF18 Nov 2014364 KB
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL7457SRHQF16 Ld CFP0.5916N/ANARoHS
ISL7457SRHVF16 Ld CFP0.5916N/ANARoHS
ISL7457SRHF/PROTO16 Ld CFP0.5916N/ANARoHS
ISL7457SRH Datasheet 19 Oct 2016
16 Ld CFP ISL73096RH
ISL7457SRH PSPICE Model 11 Nov 2014
ISL7457SRH
AN9867: End of Life Derating: A Necessity or Over Kill 13 Nov 2014
AN1458: Extending the TID Capability of the ISL7457SRH 13 Nov 2014
SMD 5962-08230 (ISL7457SRH) 12 Jan 2015
ISL7457SRH SEE Test Report 17 Nov 2014
Intersil Commercial Lab Services 18 Nov 2014