• 简体中文
• English

LT1037 - Low Noise, High Speed Precision Operational Amplifiers

The LT®1007/LT1037 series features the lowest noise performance available to date for monolithic operational amplifiers: 2.5nV/rtHz wideband noise (less than the noise of a 400 Ohm resistor), 1/f corner frequency of 2Hz and 60nV peakto- peak 0.1Hz to 10Hz noise. Low noise is combined with outstanding precision and speed specifications: 10µV offset voltage, 0.2µV/°C drift, 130dB common mode and power supply rejection, and 60MHz gain bandwidth product on the decompensated LT1037, which is stable for closed-loop gains of 5 or greater.

The voltage gain of the LT1007/LT1037 is an extremely high 20 million driving a 2k Ohm load and 12 million driving a 600 Ohm load to ±10V.

In the design, processing and testing of the device, particular attention has been paid to the optimization of the entire distribution of several key parameters. Consequently, the specifications of even the lowest cost grades (the LT1007C and the LT1037C) have been spectacularly improved compared to equivalent grades of competing amplifiers.

The sine wave generator application shown below utilizes the low noise and low distortion characteristics of the LT1037.

Features Guaranteed 4.5 nV/Root-Hz 10Hz noise Guaranteed 3.8 nV/Root-Hz 1kHz noise 0.1Hz to 10Hz noise, 60nVP-P, Typical Guaranteed 7 Million Min Voltage Gain, RL = 2k Guaranteed 3 Million Min Voltage Gain, RL = 600 Ohm Guaranteed 25µV Max Offset Voltage Guaranteed 0.6µV/°C Max Drift with Temperature Guaranteed 11V/µsec Min Slew Rate (LT1037) Guaranteed 117 dB Min CMRR Typical Application

Applications Low Noise Signal Processing Microvolt Accuracy Threshold Detection Strain Gauge Amplifiers Direct Coupled Audio Gain Stages Sine Wave Generators Tape Head Preamplifiers Microphone Preamplifiers Packaging

Demo Boards