LT3651-8.X - Monolithic 4A High Voltage 2-Cell Li-Ion Battery Charger

The LT®3651-8.2/LT3651-8.4 are 2-cell, 4A Li-Ion/Polymer battery chargers that operate over a 9V to 32V input voltage range. An efficient monolithic average current mode synchronous switching regulator provides constant current, constant voltage charging with programmable maximum charge current. A charging cycle starts with battery insertion or when the battery voltage drops 2.5% below the float voltage. Charger termination is selectable as either charge current or internal safety timer timeout. Charge current termination occurs when the charge current falls to one-tenth the programmed maximum current (C/10). Timer based termination is typically set to three hours and is user programmable (charging continues below C/10 until timeout). Once charging is terminated, the LT3651-8.2/LT3651-8.4 supply current drops to 85μA into a standby mode.

The LT3651-8.2/LT3651-8.4 offer several safety features. A discharged battery is preconditioned with a small trickle charge and generates a signal if unresponsive. A thermistor monitors battery temperature, halting charging if out of range. Excessive die temperature reduces charge current. Charge current is also reduced to maintain constant input current to prevent excessive input loading. The LT3651-8.2/LT3651-8.4 are available in a 5mm × 6mm 36-lead QFN package.

Features
  • Wide Input Voltage Range: 9V to 32V (40V Absolute Maximum)
  • Programmable Charge Current Up to 4A
  • Selectable C/10 or Onboard Timer Termination
  • Dynamic Charge Rate Programming/Soft-Start
  • Programmable Input Current Limit
  • ±0.5% Float Voltage Accuracy
  • ±7.5% Charge Current Accuracy
  • ±4% C/10 Detection Accuracy
  • NTC Resistor Temperature Monitor
  • Auto-Recharge at 97.5% Float Voltage
  • Auto-Precondition at <70% Float Voltage
  • Bad Battery Detection with Auto-Reset
  • Average Current Mode, Synchronous Switcher
  • User Programmable Frequency
  • Low Profile (0.75mm) 5mm × 6mm 36-Lead QFN Package
Typical Application

Applications
  • Industrial Handheld Instruments
  • 12V to 24V Automotive and Heavy Equipment
  • Desktop Cradle Chargers
  • Notebook Computers
Packaging
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LT3651EUHE-8.2#PBF5x6 QFN-36E$5.90$4.13
LT3651EUHE-8.2#TRPBF5x6 QFN-36E$4.19
LT3651EUHE-8.4#PBF5x6 QFN-36E$5.90$4.13
LT3651EUHE-8.4#TRPBF5x6 QFN-36E$4.19
LT3651IUHE-8.2#PBF5x6 QFN-36I$6.79$4.75
LT3651IUHE-8.2#TRPBF5x6 QFN-36I$4.81
LT3651IUHE-8.4#PBF5x6 QFN-36I$6.79$4.75
LT3651IUHE-8.4#TRPBF5x6 QFN-36I$4.81
Demo Boards
Part NumberDescriptionPrice
DC1484A-ALT3651EUHE-8.4 Demo Board | 12V to 32VIN, 4A Sync Buck 2-Cell Li-Ion ChargerContact Factory
DC1484A-BLT3651EUHE-8.2 Demo Board | 12V to 32VIN, 4A Sync Buck 2-Cell Li Ion ChargerContact Factory
Datasheet
Reliability Data
Product Selector Card
LT Journal
Press Release
Ad
LTspice
Related Product
LT3651-8.2/LT3651-8.4 - Monolithic 4A High Voltage 2-Cell Li-Ion Battery Charger
R541 - Reliability Data
20V Battery Gas Gauge
4A Li-Ion Battery Charger Accepts Inputs to 32V
32V (最高 40V) 同步单片式单节锂离子/聚合物电池充电器提供高达 4A 的充电电流
LT3651-8.2 Footprints and Symbols
Charge BIG Batteries Fast
LT3651- 8.4 Demo Circuit - 4A, 2-Cell Charger with Maximum Power Point Control (16-32V to 8.4V @ 4A)
LT3651-8.4 Demo Circuit - 2-Cell Li-Ion Charger with Input Current Limit & Charge Timeout (9-32V to 8.4V @ 4A)