The LT3652HV is a complete monolithic step-down battery charger that operates over a 4.95V to 34V input range. The LT3652HV provides a constant-current/constant-voltage charge characteristic, with maximum charge current externally programmable up to 2A. The charger employs a 3.3V float voltage feedback reference, so any desired battery float voltage up to 18V can be programmed with a resistor divider.
The LT3652HV employs an input voltage regulation loop, which reduces charge current if the input voltage falls below a programmed level, set with a resistor divider. When the LT3652HV is powered by a solar panel, the input regulation loop is used to maintain the panel at peak output power.
The LT3652HV can be configured to terminate charging when charge current falls below 1/10 of the programmed maximum (C/10). Once charging is terminated, the LT3652HV enters a low-current (85μA) standby mode. An auto-recharge feature starts a new charging cycle if the battery voltage falls 2.5% below the programmed fl oat voltage. The LT3652HV also contains a programmable safety timer, used to terminate charging after a desired time is reached. This allows top-off charging at currents less than C/10.
Part Number | Package | Temp | Price(1-99) | Price (1k)* |
---|---|---|---|---|
LT3652HVEDD#PBF | 3x3 DFN-12 | E | $4.86 | $3.40 |
LT3652HVEDD#TRPBF | 3x3 DFN-12 | E | $3.46 | |
LT3652HVEMSE#PBF | MS-12E | E | $4.86 | $3.40 |
LT3652HVEMSE#TRPBF | MS-12E | E | $3.46 | |
LT3652HVIDD#PBF | 3x3 DFN-12 | I | $5.29 | $3.70 |
LT3652HVIDD#TRPBF | 3x3 DFN-12 | I | $3.76 | |
LT3652HVIMSE#PBF | MS-12E | I | $5.29 | $3.70 |
LT3652HVIMSE#TRPBF | MS-12E | I | $3.76 |
Part Number | Description | Price |
---|---|---|
DC1688A | LT3652HVEDD Demo Board | 17.7V to 34VIN, Buck 12V Lead Acid@2A, MPPC for Solar Power Input | $150.00 |