LTC4006 - 4A, High Efficiency, Standalone Li-Ion Battery Charger

The LTC4006 is a complete constant-current/constant voltage charger controller for 2-, 3- or 4-cell lithium batteries in a small package using few external components. The PWM controller is a synchronous, quasi-constant frequency, constant off-time architecture that will not generate audible noise even when using ceramic capacitors.

The LTC4006 is available in 8.4V, 12.6V and 16.8V versions with ±0.8% voltage accuracy. Charging current is programmable with a single sense resistor to ±4% typical accuracy. Charging current can be monitored as a representative voltage at the IMON pin. A timer, programmed by an external resistor, sets the total charge time or is reset to 25% of total charge time after C/10 charging current is reached. Charging automatically resumes when the cell voltage falls below 3.9V/cell.

Fully discharged cells are automatically trickle charged at 10% of the programmed current until the cell voltage exceeds 2.5V/cell. Charging terminates if the low-battery condition persists for more than 25% of the total charge time.

The LTC4006 includes a thermistor sensor input that suspends charging if an unsafe temperature condition is detected and automatically resumes charging when the battery temperature returns to within safe limits.

Features
  • Complete Charger Controller for 2-, 3- or 4-Cell Lithium-Ion Batteries
  • High Conversion Efficiency: Up to 96%
  • Output Currents Exceeding 4A
  • ±0.8% Accurate Preset Voltages: 8.4V, 12.6V, 16.8V
  • Built-In Charge Termination with Automatic Restart
  • AC Adapter Current Limiting Maximizes Charge Rate*
  • Automatic Conditioning of Deeply Discharged Batteries
  • Thermistor Input for Temperature Qualified Charging
  • Wide Input Voltage Range: 6V to 28V
  • 0.5V Dropout Voltage; Maximum Duty Cycle: 98%
  • Programmable Charge Current: ±4% Accuracy
  • Indicator Outputs for Charging, C/10 Current Detection and AC Adapter Present
  • Charging Current Monitor Output
  • 16-Pin Narrow SSOP Package
Typical Application
Applications
  • Notebook Computers
  • Portable Instruments
  • Battery-Backup Systems
  • Standalone Li-Ion Chargers
Packaging
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC4006EGN-2#PBFSSOP-16E$5.09$3.60
LTC4006EGN-2#TRPBFSSOP-16E$3.66
LTC4006EGN-4#PBFSSOP-16E$5.09$3.60
LTC4006EGN-4#TRPBFSSOP-16E$3.66
LTC4006EGN-6#PBFSSOP-16E$5.09$3.60
LTC4006EGN-6#TRPBFSSOP-16E$3.66
Demo Boards
Part NumberDescriptionPrice
DC495BLTC4006EGN-6 Demo Board | VIN = 9V to 20V, 8.4V/2A Sync Buck Li-Ion Battery Charger$125.00
Datasheet
Reliability Data
LT Journal
Related Product
LTC4006 - 4A, High Efficiency, Standalone Li-Ion Battery Charger
R480 Reliability Data
Mar 2003 Next Generation No Compromise Battery Chargers
LTC4006 Footprints and Symbols