• 简体中文
• English

LTC4011 - High Efficiency Standalone Nickel Battery Charger

The LTC4011 provides a complete, cost-effective nickel battery fast charge solution in a small package using few external components. A 550kHz PWM current source controller and all necessary charge initiation, monitoring and termination control circuitry are included.

The LTC4011 automatically senses the presence of a DC adapter and battery insertion or removal. Heavily discharged batteries are precharged with a trickle current. The LTC4011 can simultaneously use both –ΔV and ΔT/Δt fast charge termination techniques and can detect various battery faults. If necessary, a top-off charge is automatically applied to NiMH batteries after fast charging is completed. The IC will also resume charging if the battery self-discharges after a full charge cycle.

All LTC4011 charging operations are qualified by actual charge time and maximum average cell voltage. Charging may also be gated by minimum and maximum temperature limits. NiMH or NiCd fast charge termination parameters are pin-selectable.

Integrated PowerPath control support ensures that the system remains powered at all times without allowing load transients to adversely affect charge termination.

Features Complete NiMH/NiCd Charger for 1 to 16 Cells No Microcontroller or Firmware Required 550kHz Synchronous PWM Current Source Controller No Audible Noise with Ceramic Capacitors PowerPath™ Control Support Programmable Charge Current: 5% Accuracy Wide Input Voltage Range: 4.5V to 34V Automatic Trickle Precharge –ΔV Fast Charge Termination Optional ΔT/Δt Fast Charge Termination Automatic NiMH Top-Off Charge Programmable Timer Automatic Recharge Multiple Status Outputs Micropower Shutdown 20-Lead Thermally Enhanced TSSOP Package Typical Application

Applications Integrated or Standalone Battery Charger Portable Instruments or Consumer Products Battery-Powered Diagnostics and Control Back-Up Battery Management Packaging

Order Information

Demo Boards