• 简体中文
• English

LTM4622 - Dual Ultrathin 2.5A or Single 5A Step-Down DC/DC μModule (Power Module) Regulator

The LTM®4622 is a complete dual 2.5A step-down switching mode μModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA packages. Included in the package are the switching controller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the LTM4622 supports an output voltage range of 0.6V to 5.5V, set by a single external resistor. Its high efficiency design delivers dual 2.5A continuous, 3A peak, output current. Only a few ceramic input and output capacitors are needed.

The LTM4622 supports selectable Burst Mode operation and output voltage tracking for supply rail sequencing. Its high switching frequency and current mode control enable a very fast transient response to line and load changes without sacrificing stability.

Fault protection features include input overvoltage, output overcurrent and overtemperature protection.

The LTM4622 is RoHS compliant with Pb-free finish.

Features Complete Solution in <1cm2 Wide Input Voltage Range: 3.6V to 20V 3.3V Input Compatible with VIN Tied to INTVCC 0.6V to 5.5V Output Voltage Dual 2.5A (3A Peak) or Single 5A Output Current ±1.5% Maximum Total Output Voltage Regulation Error Over Load, Line and Temperature Current Mode Control, Fast Transient Response External Frequency Synchronization Multiphase Parallelable with Current Sharing Output Voltage Tracking and Soft-Start Capability Selectable Burst Mode® Operation Overvoltage Input and Overtemperature Protection Power Good Indicators 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA Packages Typical Application

Applications General Purpose Point of Load Conversion Telecom, Networking and Industrial Equipment Medical Diagnostic Equipment Test and Debug Systems Packaging

Demo Boards