RH1499M – Radiation Hardened 10MHz, 6V/µs, Quad Rail-to- Rail Input and Output Precision C-Load Op Amp

The RH1499 is a quad, rail-to-rail input and output precision C-Load™ op amp with a 10MHz gain-bandwidth product and a 6V/μs slew rate.

The RH1499 is designed to maximize input dynamic range by delivering precision performance over the full supply voltage. Using a patented technique, the input stages of the RH1499 are trimmed, one at the negative supply and the other at the positive supply. The resulting guaranteed common mode rejection is much better than other rail-to-rail input op amps. When used as a unity-gain buffer in front of single supply 12-bit A-to-D converters, the RH1499 is guaranteed to add less than 1LSB of error even in single 5V supply systems.

With 110dB of supply rejection, the RH1499 maintains its performance over a supply range of 4.5V to 36V. The inputs can be driven beyond the supplies without damage or phase reversal of the output. These op amps remain stable while driving capacitive loads up to 10,000pF.

The wafer lots are processed to Linear Technology's in house Class S flow to yield circuits usable in stringent military and space applications.

Features

MIL-PRF-38535 Class V Compliant Version - 5962R1325101VDA
Rail-to-Rail Input and Output
800μV Max VOS from V+ to V–
Gain-Bandwidth Product: 10MHz
Slew Rate: 4.5V/μs
Low Supply Current per Amplifier: 1.7mA
Input Offset Current: 65nA Max
Input Bias Current: 650nA Max
Low Input Noise Voltage Density: 12nV/√Hz Typ
Wide Supply Range: 5V to ±15V
Large Output Drive Current: 24mA with 5V supply
Stable for Capacitive Loads Up to 10,000pF
Total Ionizing Dose (TID) Tolerance, per TM1019.8, MIL-STD-883:- 200kRad (Si), per condition A at 50Rads(Si)/sec- 100kRad (Si), per condition D at 10mRads(Si)/sec- ELDRS Pass 100kRad(Si)
Displacement Damage Defect (DDD) up to 1E12 Neutrons/cm2(please refer to RH1498 DDD Report)
Characterized for Single Event Effects up to 117.5 MeV.cm2/mg(please refer to RH1498 SEE Report)