FlexMod Low Voltage Disconnects Series - Preserves Starting Voltage by Isolating Auxiliary Battery when System Voltage Drops

DataSheet:Download FlexMod LVD Hotfeed

The FlexMod Low Voltage Disconnect unit preserves battery charge and protects battery banks by automatically disconnecting loads when battery voltage drops to a critical level.
Automatically disconnects specified loads when unit senses that vehicle battery voltage is low; automatically reconnects when voltage is restored. Protects vehicles with one battery (or bank of batteries).

Features & Benefits

Compact design (4” x 3” x 1”) unit is waterproof, dustproof and vibration-proof. Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard.
Senses battery voltage and disconnects non-essential loads if level falls below programmed voltage. Automatically reconnects loads when battery is charging.
Eliminates downtime and vehicle breakdown costs due to dead batteries.
High reliability unit is rated for more than 1,000,000 on/off cycles.
Overvoltage and overcurrent sensing protects the FlexMod and direct loads.
Single auto-ranging unit (12V or 24V) means less stock and fewer SKUs.
Unit is autoranging - senses 12V or 24V systems.

Ordering Information

Catalog #	Connector	Description	Details	Dimensions	Disconnect voltage (12V)	Disconnect voltage (24V)	Humidity	Inductive transient	Ingress Protection	Load current
48610	8-pin Sealed Deutsch type	FlexMod LVD Unit Only	10 A	4 x 2.7 x 1.31	12.05 V min12.1 V typical12.15 V max	24.1 V min24.2 V typical24.3 max	0 to 90% RH	+/- 600 V	IP67	10 A at 85C
48610-01	8-pin Sealed Deutsch type	FlexMod LVD Unit and 12805 Harness	10 A	4 x 2.7 x 1.31	12.05 V min12.1 V typical12.15 V max	24.1 V min24.2 V typical24.3 max	0 to 90% RH	+/- 600 V	IP67	10 A at 85C
48710	8-pin Sealed Deutsch type	Programmable FlexMod LVD Unit	10 A	4 x 2.7 x 1.31	Programmable Attribute	Programmable Attribute	0 to 90% RH	+/- 600 V	IP67	10 A at 85C