MAX16818EVKIT：MAX16818 Evaluation Kit
The MAX16818 evaluation kit (EV kit) is a fully assembled
and tested surface-mount printed-circuit board
(PCB) designed to evaluate the MAX16818 pulse-width
modulation (PWM) LED driver controller in a buck-boost
configuration.
The MAX16818 EV kit operates from a DC supply voltage
of 6V to 28V. The EV kit's output is configured to
deliver at least 1A of current into an 18V series LED
string. The LED brightness can be dimmed using a digital
PWM signal.
The EV kit provides an option to configure the
MAX16818 IC's overvoltage protection, switching frequency,
and frequency compensation. The MAX16818
EV kit also features a 180° out-of-phase clock output
PCB pad.
Key Features- 6V to 28V Input-Voltage Range
- 1A Output Current into an 18V LED String
- Pulse-Width Modulated LED Current Dimming
- Resistor-Adjustable Overvoltage Protection and Switching Frequency
- 180° Out-of-Phase Clock Output
- Fully Assembled and Tested
| Applications/Uses- Automotive Emergency Lighting and Signage
- Automotive, Bus/Truck Exterior Lighting
- Front Projectors/Rear Projection TVs
- LCD TVs and Display Backlight
- Portable and Pocket Projectors
|
DataSheet
Ordering Information
| Part Number | Status | Recommended Replacement | Package |
|---|
| MAX16818EVKIT+ | Active | | EVKIT; |
