数据手册MAX17505 Industry's Only 60V, 1.7A Internal FET Synchronous Buck Converter .pdf [英文Rev.0(PDF,819.3kB)]

{状况:生产中。}

The MAX17505 high-efficiency, high-voltage, synchronously rectified step-down converter with dual integrated MOSFETs operates over a 4.5V to 60V input. It delivers up to 1.7A and 0.9V to 90%VIN output voltage. Built-in compensation across the output voltage range eliminates the need for external components. The feedback (FB) regulation accuracy over -40°C to +125°C is ±1.1%. The device is available in a compact (4mm x 4mm) TQFN lead(Pb)-free package with an exposed pad. Simulation models are available. The device features a peak-current-mode control architecture with a MODE feature that can be used to operate the device in pulse-width modulation (PWM), pulse-frequency modulation (PFM), or discontinuous-conduction mode (DCM) control schemes. PWM operation provides constant frequency operation at all loads, and is useful in applications sensitive to switching frequency. PFM operation disables negative inductor current and additionally skips pulses at light loads for high efficiency. DCM features constant frequency operation down to lighter loads than PFM mode, by not skipping pulses but only disabling negative inductor current at light loads. DCM operation offers efficiency performance that lies between PWM and PFM modes. The low-resistance, on-chip MOSFETs ensure high efficiency at full load and simplify the layout. A programmable soft-start feature allows users to reduce input inrush current. The device also incorporates an output enable/undervoltage lockout pin (EN/UVLO) that allows the user to turn on the part at the desired input-voltage level. An open-drain active-low RESET pin provides a delayed power-good signal to the system upon achieving successful regulation of the output voltage.

产品关键特性
  • Eliminates External Components and Reduces Total Cost
    • No Schottky-Synchronous Operation for High Efficiency and Reduced Cost
    • Internal Compensation for Stable Operation at Any Output Voltage
    • All-Ceramic Capacitor Solution: Ultra-Compact Layout with as Few as Eight External Components
  • Reduces Number of DC-DC Regulators to Stock
    • Wide 4.5V to 60V Input Voltage Range
    • 0.9V to 90%VIN Output Voltage
    • Delivers Up to 1.7A Over Temperature
    • 200kHz to 2.2MHz Adjustable Frequency with External Synchronization
    • Available in a 20-Pin, 4mm x 4mm TQFN Package
  • Reduces Power Dissipation
    • Peak Efficiency > 90%
    • PFM and DCM Modes for High Light-Load Efficiency
    • Shutdown Current = 2.8µA (typ)
  • Operates Reliably
    • Hiccup-Mode Current Limit and Autoretry Startup
    • Built-In Output-Voltage Monitoring (Open-Drain Active-Low RESET Pin)
    • Resistor-Programmable EN/UVLO Threshold
    • Adjustable Soft-Start and Prebiased Power-Up
    • -40°C to +125°C Operation
应用与使用范围
  • 基站电源
  • 配电稳压
  • 通用负载点电源
  • 高压单板系统
  • 工业电源
  • 壁式变压器稳压
Typical Application Circuit

芯片订购型号
订购型号产品状态封装形式工作温度RoHS/无铅
MAX17505ATP+生产中TQFN;20引脚;16.8mm²封装信息-40°C至+125°CRoHS/无铅:无铅材料分析
MAX17505ATP+T生产中TQFN;20引脚;16.8mm²封装信息-40°C至+125°CRoHS/无铅:无铅材料分析
MAX17505EVKITA#生产中KIT;封装信息参考数据资料
MAX17505EVKITB#生产中KIT;封装信息参考数据资料
功能接近器件
MAX175034.5V-60V, 2.5A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation
MAX175044.5V–60V、3.5A、高效率、同步降压DC-DC转换器,带内部补偿
MAX17505.pdf MAX17505
MAX17505_cn.pdf MAX17505
MAX17505.pdf MAX17505
MAX17505.pdf MAX17505
Realizing Industry 4.0: Essential System Considerations DS28E25
Power Supplies Begin the Circuit Foundation, Taming Switching Power-Supply Layout MAX17552
MAX17505.pdf MAX17505
Typical Application Circuit MAX17505