数据手册：MAX710EVKIT .pdf [英文Rev.0(PDF,58kB)]
{状况：生产中。}
The MAX710 evaluation kit (EV kit) is a step-up DC-DC converter with a linear-regulator output. The MAX710 accepts a +1.8V to +11V input and converts it to a 3.3V or 5V output for up to 250mA currents. The EV kit is optimized for battery applications where the input varies above and below the regulated output voltage. It can be set in two modes: one optimized for lowest noise, the other for highest efficiency.
The MAX710 EV kit is a fully assembled and tested surface-mount circuit board. It can also be used to evaluate the MAX711, which has an adjustable output voltage (2.7V to 5.5V). Additional pads on the board accommodate the external feedback resistors for setting different output voltages.
产品关键特性
- Step-Up/Down Voltage Conversion
- +1.8V to +11V Input Range
- 3.3V or 5V Selectable Output Voltage (MAX710)
- 2.7V to 5.5V Adjustable Output Voltage (MAX711)
- 250mA Output Current
- No External FETs Required
- Output is Fully Off during Shutdown
- 5µA Max Shutdown Current
- Low-Battery Comparator
- Low-Noise and High-Efficiency Modes
- Surface-Mount Components
- Fully Assembled and Tested
| 应用与使用范围
- 寻呼机
- 个人医疗监视器
- 指针设备
- 远端控制
- 单节电池供电设备
|
芯片订购型号
| 订购型号 | 产品状态 | 封装形式 | 工作温度 | RoHS/无铅 |
| MAX710EVKIT | 生产中 | KIT；封装信息 | | 参考数据资料 |
相关芯片型号
| MAX710 | 3.3V/5V或可调、升/降压型DC-DC转换器 |
| MAX711 | 3.3V/5V或可调、升/降压型DC-DC转换器 |
