MAX9994EVKIT：Evaluation Kit for the MAX9994
The MAX9994 evaluation kit (EV kit) simplifies the evaluation
of the MAX9994 UMTS, DCS, and PCS base-station
downconversion mixer. It is fully assembled and
tested at the factory. Standard 50Ω SMA connectors
are included on the EV kit's input and output ports to
allow quick and easy evaluation on the test bench.
This document provides a list of test equipment required
to evaluate the device, a straightforward test procedure
to verify functionality, a description of the EV kit circuit,
the circuit schematic, a bill of materials (BOM) for the kit,
and artwork for each layer of the PC board.
Contact MaximDirect sales at 888-629-4642 for pricing
and availability on these kits.
Key Features- Fully Assembled and Tested
- 1700MHz to 2200MHz RF Frequency
- 1400MHz to 2000MHz LO Frequency
- 40MHz to 350MHz IF Frequency
- 8.3dB Conversion Gain
- 26.2dBm IIP3
- 9.7dB Noise Figure
- Integrated LO Buffer
- Switch-Selectable (SPDT), Two LO Inputs
- -3dBm to +3dBm LO Drive
- 45dB LO1 to LO2 Isolation
- 50Ω SMA Connectors on Input and Output Ports
- 4:1 Balun for Single-Ended IF Output
| Applications/Uses- cdmaOne™ and cdma2000® Base Stations
- DCS1800/PCS1900 EDGE Base Stations
- Digital and Spread-Spectrum Communication Systems
- Fixed Broadband Wireless Access
- Microwave Links
- Military Systems
- PHS/PAS Base Stations
- Predistortion Receivers
- Private Mobile Radios (PMRs)
- UMTS/WCDMA Base Stations
- Wireless Local Loop (WLL)
|
DataSheet
Ordering Information
| Part Number | Status | Recommended Replacement | Package |
|---|
| MAX9994EVKIT | Active | | EVKIT; |
