MAX9995EVKIT：Evaluation Kit for the MAX9995
The MAX9995 evaluation kit (EV kit) simplifies the evaluation
of the MAX9995 dual high-linearity mixer. It is fully
assembled and tested at the factory. Standard
50Ω
SMA connectors are included on the EV kit for the input
and output to allow quick and easy evaluation on the
test bench.
This document provides a list of equipment required to
evaluate the device, a straightforward test procedure to
verify functionality, a description of the EV kit circuit, the
circuit schematic, a bill of materials (BOM) for the kit,
and artwork for each layer of the PC board.
Contact MaximDirect sales at 888-629-4642 to check
on pricing and availability for these kits.
Key Features- Fully Assembled and Tested
- 1700MHz to 2200MHz RF Frequency Range
- 1400MHz to 2000MHz LO Frequency Range
(MAX9995)
- 1900MHz to 2400MHz LO Frequency Range
(Contact Factory)
- 40MHz to 350MHz IF Frequency Range
- 6.1dB Conversion Gain
- +25.6dBm Input IP3
- 9.8dB Noise Figure
- 66dBc 2RF-2LO Spurious Rejection at
PRF = -10dBm
- Dual Channels Ideal for Diversity Receiver
Applications
- Integrated LO Buffer
- Integrated RF and LO Baluns for Single-Ended
Inputs
- Low -3dBm to +3dBm LO Drive
- Built-In SPDT LO Switch with 50dB LO1-LO2
Isolation and 50ns Switching Time
- 44dB Channel-to-Channel Isolation
| Applications/Uses- DCS1800 and EDGE Base Stations
- Fixed Broadband Wireless Access
- Military Systems
- PCS1900 and EDGE Base Stations
- PHS/PAS Base Stations
- Private Mobile Radios (PMRs)
- UMTS/WCDMA and cdma2000® 3G Base Stations
- Wireless Local Loop (WLL)
|
DataSheet
Ordering Information
| Part Number | Status | Recommended Replacement | Package |
|---|
| MAX9995EVKIT | No Longer Available | | EVKIT; |
