DM330013 Microstick for dsPIC33F and PIC24H

The Microstick for dsPIC33F and PIC24H devices is designed to provide designers with an easy to use, economical development environment for 16-bit dsPIC® Digital Signal Controllers and PIC® Microcontrollers.

Microstick provides all you need to get started at a very low cost. It has an integrated programmer / debugger. It can be used stand-alone or plugged into a prototyping board for extremely flexible development. The device under test is socketed for easy change-out, and Microchip’s MPLAB® Integrated Development Environment supports Microstick. It has never been more affordable to get started with Microchip 16-bit devices!

Supported Parts: 
 



  • Low Cost 16-bit board – Priced at $24.99 at Microchip Direct
  • Integrated USB programmer / debugger – No external debugger required
  • USB Powered – Ease of use, No external power required
  • Socketed dsPIC/PIC24 – Flexible, Easy device replacement
  • 0.025” Pin headers – Enables plug-in to Breadboard with room for jumper wires
  • Easy access to all device signals for probing
  • Small size - Smaller than a stick of gum at 20 x76mm – Easily Portable
  • On board debug LED, Utility LED and Reset Switch
  • Free demo code
Documentation & Software
DocumentsLast UpdatedSize
Microstick_demo_v2013_06_266/28/2013 3:09:57 PM40KB
Microstick for dsPIC33F and PIC24H Devices Information Sheet2/28/2011 12:51:14 AM235KB
Microstick_Toggle_Ports11/12/2010 3:35:50 PM125KB
Microstick_Binary_Count11/12/2010 3:29:58 PM125KB
Microstick - Temperature sensor project7/8/2010 9:38:52 AM145KB
Microstick_Flash_LED7/2/2010 11:38:53 AM116KB
Microstick_demo_v2013_06_26 DM330013-2
Microstick for dsPIC33F and PIC24H Devices Information Sheet DM330013
Microstick_Toggle_Ports DM330013
Microstick_Binary_Count DM330013
Microstick - Temperature sensor project DM330013
Microstick_Flash_LED DM330013
DM330013