MCP4641

The MCP464X devices are dual channel, non-volatile, 7-bit (129 wiper steps) digital potentiometers with EEPROM and an I2C compatible interface. The MCP464X family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer WiperLock™ Technology which allows the user unlimited reprogramming and locking of the wiper setting. It is useful for equipment that requires factory trimming or recalibration. The MCP464X devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count.

Features
  • Dual Resistor Network
  • Potentiometer or Rheostat configuration options
  • Resistor Network Resolution 7-bit: 128 Resistors (129 Steps)
  • 7-bit: 128 Resistors (129 Steps)
  • RAB Resistances options of: 5kΩ 10kΩ 50kΩ 100kΩ
  • 5kΩ
  • 10kΩ
  • 50kΩ
  • 100kΩ
  • Zero-Scale to Full-Scale Wiper operation
  • Low Wiper Resistance: 75Ω (typ.)
  • Low Tempco: Absolute (Rheostat): 50 ppm typical(0°C to 70°C) Ratiometric (Potentiometer): 15 ppm typical
  • Absolute (Rheostat): 50 ppm typical(0°C to 70°C)
  • Ratiometric (Potentiometer): 15 ppm typical
  • I2C™Compatible Serial interface 100 kHz 400 kHz 3.4 MHz
  • 100 kHz
  • 400 kHz
  • 3.4 MHz
  • Brown-out reset protection (1.5V typical)
  • Serial Interface Inactive current (2.5 uA typ.)
  • High-Voltage Tolerant Digital Inputs: Up to 12.5V
  • Wide Operating Voltage: 2.7V to 5.5V - Device Characteristics Specified 1.8V to 5.5V - Device Operation
  • 2.7V to 5.5V - Device Characteristics Specified
  • 1.8V to 5.5V - Device Operation
  • Wide Bandwidth (-3dB) Operation: 2 MHz (typ.) for 5.0 kΩ device
  • 2 MHz (typ.) for 5.0 kΩ device
  • Extended temperature range (-40°C to +125°C)
  • AEC-Q100 Grade 1 quarlified
Parameter
Parameter Name Value Value
Temp. Range (°C) -40 to +125 -40 to +125
Volatile / Non Volatile Non-volatile Non-volatile
Number of Taps 129 129
Resistance (ohms) K 5, 10, 50, 100 5, 10, 50, 100
# per Package 2 2
INL (Max) 1 1
DNL (Max) 0.5 0.5
Interface I²C™ I²C™
Documents
7/8-Bit Single/Dual I2C Digital POT with Non-Volatile MemoryData Sheets03/04/20132808KB
MCP453X/455X/463X/465X -7/8-Bit Single/Dual I2C Digital POT with Volatile MemoryData Sheets02/22/20133335KB
AN1080 - Understanding Digital Potentiometers Resistor VariationsAppNote07/27/2009565KB
AN1316 - Using Digital Potentiometers for Programmable Amplifier GainAppNote04/14/2010441KB
AN219 - Comparing Digital Potentiometers to Mechanical PotentiometersAppNote11/20/2000133KB
AN691 - Optimizing the Digital Potentiometer in Precision CircuitsAppNote05/08/2001240KB
AN692 - Using a Digital Potentiometer to Optimize a Precision Single Supply Photo DetectAppNote02/23/2001253KB
AN737 - Using Digital Potentiometers to Design Low Pass Adjustable FiltersAppNote02/24/2004277KB
Implementing a 10-Bit Digi Pot Using a Quad 8-Bit Digi PotTech Briefs01/10/2013360KB
Analog Solutions for Automotive Applications Design GuideBrochures12/08/2009284KB
Automotive Recommended Product Selector GuideBrochures09/16/20147598KB
Signal Chain Design GuideBrochures11/10/20123229KB
Digital Potentiometer Design GuideDesign Guides01/03/2011706KB
Analog & Interface Product Selector GuideProduct Line Card03/21/20164116KB
MCP46XX Evaluation Board User's GuideUser Guides10/02/20131408KB
MCP46XX PICtail Plus Daughter Board User's GuideUser Guides06/30/20093235KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP4641-103E/ST14TSSOP-40C to +125CTUBE1.060.880.800.770.76
MCP4641-104E/ST14TSSOP-40C to +125CTUBE1.060.880.800.770.76
MCP4641-502E/ST14TSSOP-40C to +125CTUBE1.060.880.800.770.76
MCP4641-503E/ST14TSSOP-40C to +125CTUBE1.060.880.800.770.76
MCP4641T-103E/ML16QFN-40C to +125CT/R1.060.880.800.770.76
MCP4641T-103E/ST14TSSOP-40C to +125CT/R1.060.880.800.770.76
MCP4641T-104E/ML16QFN-40C to +125CT/R1.060.880.800.770.76
MCP4641T-104E/ST14TSSOP-40C to +125CT/R1.060.880.800.770.76
MCP4641T-502E/ML16QFN-40C to +125CT/R1.060.880.800.770.76
MCP4641T-502E/ST14TSSOP-40C to +125CT/R1.060.880.800.770.76
MCP4641T-503E/ML16QFN-40C to +125CT/R1.060.880.800.770.76
MCP4641T-503E/ST14TSSOP-40C to +125CT/R1.060.880.800.770.76
相关开发工具
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP4641T-503E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4641T-104E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4641-104E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4641-502E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4641T-502E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4641-103E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4641T-103E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4641-503E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4641T-502E/ML0.0417000.21212116QFN4x4x0.9mmMatte Tine3
MCP4641T-103E/ML0.0417000.21212116QFN4x4x0.9mmMatte Tine3
MCP4641T-503E/ML0.0417000.21212116QFN4x4x0.9mmMatte Tine3
MCP4641T-104E/ML0.0417000.21212116QFN4x4x0.9mmMatte Tine3
7/8-Bit Single/Dual I2C Digital POT with Non-Volatile Memory MCP4662
MCP453X/455X/463X/465X -7/8-Bit Single/Dual I2C Digital POT with Volatile Memory MCP4662
7/8-Bit Single/Dual I2C Digital POT with Non-Volatile Memory MCP46XXEV
MCP453X/455X/463X/465X -7/8-Bit Single/Dual I2C Digital POT with Volatile Memory MCP46XXEV
AN1080 MCP4XXXDM-DB
AN1316 MCP46XXEV
AN1316 Excel Files MCP46XXEV
AN219 MCP4651
AN691 MCP4651
AN692 MCP4662
AN737 MCP4552
Implementing a 10-Bit Digi Pot Using a Quad 8-Bit Digi Pot MCP4661
Analog Solutions for Automotive Applications Design Guide MCP2022
Automotive Recommended Product Selector Guide MCP23S09
Signal Chain Design Guide MCP3901
Digital Potentiometer Design Guide SOIC8EV
Analog & Interface Product Selector Guide ENC624J600
MCP46XX Evaluation Board User's Guide MCP46XXEV
MCP46XX PICtail Plus Daughter Board User's Guide MCP46XXDM-PTPLS