The Micrel MIC22200 is a high efficiency, 2A integrated switch synchronous buck (step-down) regulator. The MIC22200 switching frequency is programmable from 800kHz to 4MHz, allowing the customer to optimize their designs either for efficiency or for the smallest footprint. The regulator achieves efficiencies as high as 95% while still switching at 1MHz over a broad load range.
The ultra high speed control loops keep the output voltage within regulation even under the extreme transient load swings commonly found in FPGAs and low-voltage ASICs.
The output voltage can be adjusted down to 0.7V to address all low voltage power needs.
The MIC22200 offers a full range of sequencing and tracking options. The Enable/Delay pin, combined with the Power-On-Reset (POR) pin, allows multiple outputs to be sequenced in many ways during turn on and turn off. The Ramp Control™ (RC) pin allows the device to be connected to another device in the MIC22X00 family of products to keep the output voltages within a certain delta V on start up.
The MIC22200 is available in a 3mm x 3mm 12-pin MLF® package with a junction operating range from -40°C to +125°C.
Features
| Parameter
|
MIC22200 - 2A Integrated Switch Synchronous Buck Reg with Freq Programmable | Data Sheets | 11/05/2015 | 1089KB |
Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
---|---|---|---|---|---|---|---|---|---|
MIC22200YML-TR | 12 | VDFN | -40C to +125C | T/R | 1.52 | 1.27 | 1.15 | 1.11 | 1.10 |
PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
---|---|---|---|---|---|---|---|---|---|
MIC22200YML-TR | 0.644302 | 12 | VDFN | 3x3x0.9mm | NiPdAu | e4 |