• 简体中文
• English

TMPSNSRD-RTD2 RTD Reference Design Board

The RTD Reference Design demonstrates how to instrument Resistive Temperature Detector (RTD) and accurately measure temperature. This solution uses the MCP3551 22-Bit Analog to Digital Converter (ADC) to measure voltage across the RTD. The ADCand the RTD are referenced using an onboard reference voltage and the ADC inputs are directly connected to the RTD terminals. This provides a ratio metric temperature measurement. The solution uses a current limiting resistor to bias the RTD. It providesa reliable and accurate RTD instrumentation without the need for extensive circuitcompensation and calibration routines.

In addition, this reference design includes a silicon temperature sensor, MCP9804. This sensor is used for comparison only, it is not needed to instrument an RTD. The MCP3551 and MCP9804 outputs are read using a USB PIC® MCU. This controller is also connected to a PC using a USB interface. The Thermal Management software is used to plot the RTD temperature data in stripchart format.

Devices Supported: MCP3551, MCP9804

Documentation & Software

AppNotes	Last Updated	Size
AN1154 - Precision RTD Instrumentation for Temperature Sensing	5/6/2013 2:30:56 PM	274KB
Thermal Management Utility (v1.5.4)	10/20/2015 10:43:44 PM	6MB
RTD Reference Design Board User's Guide	7/7/2014 11:45:50 AM	375KB
RTD Reference Design Board (TMPSNSRD-RTD2) Firmware	10/24/2013 4:37:31 PM	15KB