74CBTLV3257D: Quad 1-of-2 multiplexer/demultiplexer

The 74CBTLV3257 provides a quad 1-of-2 high-speed multiplexer/demultiplexer with common select (S) and output enable (OE) inputs. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When pin OE = LOW, one of the two switches is selected (low-impedance ON-state) with pin S. When pin OE = HIGH, all switches are in the high-impedance OFF-state, independent of pin S.

Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 2.3 V to 3.6 V.

To ensure the high-impedance OFF-state during power-up or power-down, OE should be tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

sot109-1_3d
Data Sheets (1)
Name/DescriptionModified Date
Quad 1-of-2 multiplexer/demultiplexer (REV 4.0) PDF (167.0 kB) 74CBTLV3257 [English]19 Dec 2011
Brochures (2)
Name/DescriptionModified Date
電圧レベルシフタ (REV 1.1) PDF (3.1 MB) 75017511_JP [English]16 Feb 2015
Voltage translation: How to manage mixed-voltage designs with NXP® level translators (REV 1.0) PDF (2.6 MB) 75017511 [English]20 May 2014
Package Information (1)
Name/DescriptionModified Date
plastic small outline package; 16 leads; body width 3.9 mm (REV 1.0) PDF (192.0 kB) SOT109-1 [English]08 Feb 2016
Packing (1)
Name/DescriptionModified Date
SO16; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 4.0) PDF (210.0 kB) SOT109-1_118 [English]24 Apr 2013
Supporting Information (2)
Name/DescriptionModified Date
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW [English]08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE [English]08 Oct 2009
IBIS Model
Ordering Information
ProductStatusFamilyFunctionVCC (V)VPASS (V)DescriptionLogic switching levelsPackage versionRON (Ohm)f(-3dB) (MHz)No of bitstpd (ns)Power dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package nameNo of pins
74CBTLV3257DActiveCBTLV(D)quad 2:1 mux/demux2.3 - 3.63.3quad 2:1 mux/demuxCMOS / LVTTLSOT109-1740040.2very Low-40~125929.652SO1616
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRMSLMSL LF
74CBTLV3257DSOT109-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1Active74CBTLV3257D,118 (9352 900 05118)74CBTLV3257D74CBTLV3257DAlways Pb-free144.911
Quad 1-of-2 multiplexer/demultiplexer 74CBTLV3257PW
電圧レベルシフタ 74AVC16245DGG-Q100
Voltage translation: How to manage mixed-voltage designs with NXP® level translators 74AVC16245DGG-Q100
cbtlv3257 IBIS model 74CBTLV3257PW
plastic small outline package; 16 leads; body width 3.9 mm NPIC6C596A_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SO16; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... NPIC6C596A_Q100
SA614A