74HC(T)6323A: Programmable ripple counter with oscillator; 3-state

The HC/HCT6323A are high-speed Si-gate CMOS devices.

They are specified in compliance with JEDEC standard no. 7A.

The HC/HCT6323A are oscillators designed for quartz crystal combined with a programmable 3-state counter, a 3-state output buffer and an overriding asynchronous master reset (MR). With the two select inputs S1 and S2 the counter can be switched in the divide-by-1, 2, 4 or 8 mode. If left floating the clock is divided by 8. The oscillator is designed to operate either in the fundamental or third overtone mode depending on the crystal and external components applied. On-chip capacitors minimize external component count for third overtone crystal applications.

The oscillator may be replaced by an external clock signal at input X1. In this event the other oscillator pin (X2) must be floating. The counter advances on the negative-going transition of X1. A LOW level on MR resets the counter, stops the oscillator and sets the output buffer in the 3-state condition. MR can be left floating since an internal pull-up resistor will make the MR inactive. In the HCT version, the MR input and the two mode select pins S1 and S2 are TTL compatible, but the X1 input has CMOS input switching levels and may be driven by a TTL output using a pull-up resistor connected to VCC.

74HC_T_6323A: Product Block Diagram
sot096-1_3d
Data Sheets (1)
Name/DescriptionModified Date
Programmable ripple counter with oscillator; 3-state (REV 3.0) PDF (71.0 kB) 74HC_HCT6323A_CNV [English]01 Sep 1993
Application Notes (2)
Name/DescriptionModified Date
Live Insertion Aspects of Philips Logic Families (REV 1.0) PDF (73.0 kB) AN252 [English]13 Mar 2013
Pin FMEA 74HC/74HCT family (REV 1.0) PDF (51.0 kB) AN11044 [English]16 Mar 2011
Users Guides (1)
Name/DescriptionModified Date
HC/T User Guide (REV 1.0) PDF (508.0 kB) HCT_USER_GUIDE [English]01 Nov 1997
Package Information (1)
Name/DescriptionModified Date
plastic small outline package; 8 leads; body width 3.9 mm (REV 1.0) PDF (244.0 kB) SOT96-1 [English]08 Feb 2016
Packing (1)
Name/DescriptionModified Date
SO8; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 2.0) PDF (232.0 kB) SOT96-1_118 [English]19 Apr 2013
Supporting Information (3)
Name/DescriptionModified Date
Wave Soldering Profile (REV 1.0) PDF (20.0 kB) WAVE_SOLDERING_PROFILE [English]30 Sep 2013
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW [English]08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE [English]08 Oct 2009
Ordering Information
ProductStatus
74HC6323ADActive
74HCT6323ADActive
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
74HC6323ADSOT96-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1Active74HC6323AD,118 (9350 137 10118)7C6323A74HC6323ADweek 6, 200584.96.621.51E811
Bulk PackActive74HC6323AD,112 (9350 137 10112)7C6323A74HC6323ADweek 6, 200584.96.621.51E811
74HCT6323ADSOT96-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1Active74HCT6323AD,118 (9350 137 20118)7T6323A74HCT6323ADweek 6, 200584.96.621.51E811
Bulk PackActive74HCT6323AD,112 (9350 137 20112)7T6323A74HCT6323ADweek 6, 200584.96.621.51E811
Programmable ripple counter with oscillator; 3-state 74HCT6323AD
Live Insertion Aspects of Philips Logic Families 74HC_T_245_Q100
Pin FMEA 74HC/74HCT family 74HC_T_597_Q100
HC/T User Guide 74HCU04PW
Reflow_Soldering_Profile Wave_Soldering_Profile LPC1112FD20
plastic small outline package; 8 leads; body width 3.9 mm CBT3306_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SO8; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... CBT3306_Q100
74AVCM162836DGG
SA612A