The KMA200 is an angle sensor system. The MagnetoResistive (MR) element and the mixed signal Integrated Circuit (IC) are integrated in one package. This angle system is already pre-programmed, offsets are compensated and therefore, ready to use.
Via the Serial Peripheral Interface (SPI) the KMA200 is user programmable. This allows user specific adjustments of the maximum angle, zero point, clamping level and a 32-bit identifier. The data is stored permanently in an Electrically Erasable Programmable Read-Only Memory (EEPROM).
The device can be programmed to work either in analog or digital (SPI) output mode. Furthermore, different analog output characteristics are possible. The resolution is better than 0.05°.
The implemented online diagnosis supervises the input and output signals as well as the data processing. Deviations and failures of the angle value are indicated in the output signal. Overall temperature supervision is implemented.
Name/Description | Modified Date |
---|---|
Programmable angle sensor (REV 8.0) PDF (261.0 kB) KMA200 | 07 Dec 2011 |
Name/Description | Modified Date |
---|---|
plastic single-ended multi-chip package; 6 interconnections; 5 in-line leads (REV 1.0) PDF (212.0 kB) SOT637 | 08 Feb 2016 |
Product | Status | Package version | Package name | Angle range (°) | Description | Operating temperature (°C) | Output type | Output voltage (V) | Supply voltage (V) |
---|---|---|---|---|---|---|---|---|---|
KMA200 | Active | SOT637 | SIP5 | 180 | Angular measurement system | 160 | 4 analog modes / 2 digital modes | ~0 / ~5.0 | 5.5 |
Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | MSL | MSL LF |
---|---|---|---|---|---|---|---|---|---|---|---|---|
KMA200 | SOT637 | Reel 7" Q1/T1 | Discontinued | KMA200,115 (9340 565 10115) | KMA200 | KMA200 | Always Pb-free | NA | NA |