PCA2000; PCA2001: 32 kHz watch circuit with programmable adaptive motor pulse
The PCA2000 and PCA2001 are CMOS integrated circuits for battery operated wrist watches with a 32 kHz quartz crystal as timing element and a bipolar 1 Hz stepping motor. The quartz crystal oscillator and the frequency divider are optimized for minimum power consumption. A timing accuracy of 1 ppm is achieved with a programmable, digital frequency adjustment.
To obtain the minimum overall power consumption for the watch, an automatic motor pulse adaptation function is provided. The circuit supplies only the minimum drive current, which is necessary to ensure a correct motor step. Changing the drive current of the motor is achieved by chopping the motor pulse with a variable duty cycle. The pulse width and the range of the variable duty cycle can be programmed to suit different types of motors. The automatic pulse adaptation scheme is based on a safe dynamic detection of successful motor steps.
A pad RESET is provided (used for stopping the motor) for accurate time setting and for accelerated testing of the watch.
The PCA2000 has a battery End Of Life (EOL) warning function. If the battery voltage drops below the EOL threshold voltage (which can be programmed for silver oxide or lithium batteries), the motor steps change from one pulse per second to a burst of four pulses every 4 seconds.
The PCA2001 uses the same circuit as the PCA2000, but without the EOL function.
PCA2000_PCA2001: Product Block Diagram
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| 32 kHz watch circuit with programmable adaptive motor pulse (REV 9.0) PDF (416.0 kB) PCA2000_2001 | 24 Nov 2011 |
Application Notes (3)
| Name/Description | Modified Date |
|---|---|
| Programming the PCA200x family of watch ICs (REV 1.0) PDF (301.0 kB) AN11219 | 06 Mar 2015 |
| ESD and EMC sensitivity of IC (REV 1.0) PDF (745.0 kB) AN10853 | 14 Mar 2013 |
| Handling bare die (REV 2.0) PDF (1.6 MB) AN10706 | 16 Jun 2011 |
Users Guides (1)
| Name/Description | Modified Date |
|---|---|
| Store and transport requirements (REV 3.0) PDF (325.0 kB) UM10569 | 10 Mar 2015 |
Ordering Information
| Product |
|---|
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | IFR(FIT) | MTBF(hour) | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PCA2001U/10AC/1 |  | Wafer, Sawn on FFC, Non-Conductive | Active | PCA2001U/10AC/1,00 (9352 895 59005) | Standard Marking | PCA2001U/10AC/1 |    | Always Pb-free | 5 | 2E8 | NA | NA | ||
| PCA2001U/AC/1 | | Die In Waffle Carriers 2" | Active | PCA2001U/AC/1,026 (9352 895 58026) | Standard Marking | PCA2001U/AC/1 | | Always Pb-free | 5 | 2E8 | NA | NA | ||
| PCA2000U/10AC/1 | | Wafer, Sawn on FFC, Non-Conductive | Active | PCA2000U/10AC/1,00 (9352 895 57005) | Standard Marking | PCA2000U/10AC/1 | | Always Pb-free | 5 | 2E8 | NA | NA | ||
| PCA2000U/AC/1 | | Die In Waffle Carriers 2" | Active | PCA2000U/AC/1,026 (9352 895 56026) | Standard Marking | PCA2000U/AC/1 | | Always Pb-free | 5 | 2E8 | NA | NA |
- PCA2000_PCA2001
- Handling bare die pcf8576d_automotive
