PCA9560: Dual 5-bit multiplexed 1-bit latched I2C EEPROM DIP switch
The PCA9560 is a 20-pin CMOS device consisting of two 6-bit non-volatile EEPROM registers, 5 hardware pin inputs and a 5-bit multiplexed output with one latched EEPROM bit. It is used for DIP switch-free or jumper-less system configuration and supports Mobile and Desktop VID Configuration, where 3 preset values (2 sets of internal non-volatile registers and 1 set of external hardware pins) set processor voltage for operation in either performance, deep sleep or deeper sleep modes. The PCA9560 is also useful in server and telecom/networking applications when used to replace DIP switches or jumpers, since the settings can be easily changed via I²C/SMBus without having to power down the equipment to open the cabinet. The non-volatile memory retains the most current setting selected before the power is turned off.
The PCA9560 typically resides between the CPU and Voltage Regulator Module (VRM) when used for CPU VID (Voltage IDentification code) configuration. It is used to bypass the CPU-defined VID values and provide a different set of VID values to the VRM, if an increase in the CPU voltage is desired. An increase in CPU voltage combined with an increase in CPU frequency leads to a performance boost of up to 7.5pct. Lower CPU voltage reduces power consumption. The main advantage of the PCA9560 over the older PCA9559 device in this application is that it contains two internal non-volatile EEPROM registers instead of just one, allowing three independent settings (performance operation, deep sleep mode and deeper sleep mode) instead of only two (performance operation and deep sleep mode). The PCA9560 is footprint compatible and a drop-in replacement for the PCA9559, without any software modifications required.
The PCA9560 has 2 address pins allow up to 4 devices to be placed on the same I²C bus or SMBus.
PCA9560: Product Block Diagram
Outline 3d SOT360-1
Data Sheets (1)
Application Notes (3)
Users Guides (3)
Brochures (1)
Package Information (1)
Packing (1)
Supporting Information (1)
IBIS Model
Ordering Information
| Product | Status | Package version | Operating Temperature (Cel) | I2C-bus (kHz) | Operating voltage (VDC) | Max Sink Current, per package (mA) | Max Sink Current per bit (mA) | No of Addresses | No of Outputs/Latched Outputs/Internal EEPROM Registers |
|---|
| PCA9560PW | Active | SOT360-1 | 0~70 | 400 | 3.0~3.6 | 100 | 25 | 4 | 5?1?2 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | IFR(FIT) | MTBF(hour) | MSL | MSL LF |
|---|
| PCA9560PW | | SOT360-1 | SSOP-TSSOP-VSO-WAVE | Reel 13" Q1/T1 | Active | PCA9560PW,118
(9352 703 30118) | PCA9560 | PCA9560PW |    | week 12, 2005 | 0.0 | 2.0 | 5E8 | 1 | 1 |
| Bulk Pack | Active | PCA9560PW,112
(9352 703 30112) | PCA9560 | PCA9560PW | | week 12, 2005 | 0.0 | 2.0 | 5E8 | 1 | 1 |
