PCA9670D: Remote 8-bit I/O expander for Fm+ I²C-bus with reset
The PCA9670 provides general-purpose remote I/O expansion via the two-wire bidirectional I²C‑bus (serial clock (SCL), serial data (SDA)).
The devices consist of eight quasi-bidirectional ports, 1 MHz 30 mA drive I²C‑bus interface, three hardware address inputs and a reset input operating between 2.3 V and 5.5 V. 1 MHz I²C‑bus Fast‑mode Plus (Fm+) can support PWM dimming of LEDs, and higher I²C‑bus drive 30 mA allows more devices to be on the bus without the need for bus buffers. The quasi-bidirectional port can be independently assigned as an input to monitor interrupt status or keypads, or as an output to activate indicator devices such as LEDs. The system master can read from the input port or write to the output port through a single register
The low current consumption of 2.5 μA (typical, static) is great for mobile applications and the latched output ports have 25 mA high current sink drive capability for directly driving LEDs.
The PCA9670 has three hardware address pins and allows up to 64 of these PCA9670 I/O expanders on the same I²C‑bus without the need for bus buffers, supporting up to 512 I/Os (for example, 512 LEDs).
The internal Power-On Reset (POR) and active LOW hardware reset pin (RESET) initialize the I/Os as inputs with a weak internal pull-up 100 μA current source.
PCA9670D: Product Block Diagram
Outline 3d SOT162-1
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| Remote 8-bit I/O expander for Fm+ I2C-bus with reset (REV 3.0) PDF (771.0 kB) PCA9670 | 30 May 2013 |
Application Notes (3)
| Name/Description | Modified Date |
|---|---|
| Driving stepper motors using NXP® I2C-bus GPIO expanders (REV 2.0) PDF (275.0 kB) AN10814 | 24 Oct 2011 |
| PCA9500/PCA9501 provides simple card maintenance and control using I²C-bus (REV 1.0) PDF (90.0 kB) AN256 | 23 Mar 2009 |
| Level shifting techniques in I2C-bus design (REV 1.0) PDF (52.0 kB) AN10441 | 20 Jun 2007 |
Users Guides (4)
| Name/Description | Modified Date |
|---|---|
| I2C-bus specification and user manual (REV 6.0) PDF (1.4 MB) UM10204 | 28 Apr 2014 |
| I2C-bus specification and user manual (REV 5.0) PDF (1.6 MB) UM10204_JA | 03 Apr 2013 |
| PCA9698 demonstration board OM6281 (REV 1.0) PDF (558.0 kB) UM10267 | 26 Sep 2008 |
| I2C Demonstration Board 2005-1 Quick Start Guide (REV 1.0) PDF (261.0 kB) UM10206 | 13 Jun 2006 |
Brochures (3)
| Name/Description | Modified Date |
|---|---|
| NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns (REV 1.0) PDF (3.5 MB) 75017540 | 01 Aug 2014 |
| Versatile, easy-to-use GPIO expanders; NXP® 4/8/16-bit I2C/SMBus GPIO expanders PCA9536/54/54A/55 (REV 1.0) PDF (319.0 kB) 75016535 | 01 Aug 2008 |
| Create smarter, more efficient white goods; An industry-leading portfolio of cost-effective, power-saving solutions for... (REV 1.0) PDF (1.1 MB) 75016543 | 01 Jun 2008 |
Package Information (1)
| Name/Description | Modified Date |
|---|---|
| plastic small outline package; 16 leads; body width 7.5 mm (REV 1.0) PDF (317.0 kB) SOT162-1 | 08 Feb 2016 |
Packing (1)
| Name/Description | Modified Date |
|---|---|
| SO16; Reel dry pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,518 or... (REV 1.0) PDF (271.0 kB) SOT162-1_518 | 25 Nov 2014 |
Supporting Information (2)
| Name/Description | Modified Date |
|---|---|
| Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW | 08 Oct 2009 |
| Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE | 08 Oct 2009 |
IBIS Model
- PCA9670 IBIS model (REV 1.0) ZIP PCA9670_1 8/8/2014
Ordering Information
| Product | Status | No of bits | VDD [min] (V) | VDD [max] (V) | Over volt tolerant | No of supplies | Standby current [typ] (µA) | Max Sink Current per bit (mA) | Max Sink Current, per package (mA) | Source Current per bit (mA) | Reset input pin | Output mode | Internal pull-up resistor per bit (kOhm) | I2C-bus (kHz) | Footprint body and leads (mm2) | Package name | Package version | Operating Temperature (Cel) | No of Addresses |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PCA9670D | Active | 8 | 2.3 | 5.5 | Y | 1 | 2.5 | 25 | 200 | 0.1 | Y | Quasi | Int I source | 1000 | 111.83 | SO16 | SOT162-1 | -40~85 | 64 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | IFR(FIT) | MTBF(hour) | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PCA9670D | | SOT162-1 | SO-SOJ-REFLOW
SO-SOJ-WAVE SO-SOJ-REFLOW SO-SOJ-WAVE | Reel 13" Q1/T1 in Drypack | Active | PCA9670D,518 (9352 827 15518) | PCA9670D | PCA9670D |    | Always Pb-free | 0.0 | 2.0 | 5E8 | 1 | 2 |
| Tube in Drypack | Active | PCA9670D,512 (9352 827 15512) | PCA9670D | PCA9670D | | Always Pb-free | 0.0 | 2.0 | 5E8 | 1 | 2 |
- Driving stepper motors using NXP® I2C-bus GPIO expanders pca9698
- PCA9500/PCA9501 provides simple card maintenance and control using I²C-bus PCA9553
- Level shifting techniques in I2C-bus design pca9685pw
- I2C-bus specification and user manual pca9685pw
- I2C-bus specification and user manual pca9685pw
- PCA9698 demonstration board OM6281 PCA9553
- I2C Demonstration Board 2005-1 Quick Start Guide pca9685pw
- NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns pca9685pw
- Versatile, easy-to-use GPIO expanders; NXP® 4/8/16-bit I2C/SMBus GPIO expanders PCA9536/54/54A/55 pcf8570p
- Create smarter, more efficient white goods; An industry-leading portfolio of cost-effective, power-saving solutions for... PMEG6010CE_AUTOMOTIVE
- PCA9670 IBIS model PCA9670PW
- plastic small outline package; 16 leads; body width 7.5 mm TJF1052IT
- Footprint for reflow soldering NPIC6C596A_Q100
- Footprint for wave soldering NPIC6C596A_Q100
- SO16; Reel dry pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,518 or... TJF1052IT
- TJF1052IT
