PN5331B3HN: USB NFC integrated solution
The PN533 is a highly integrated transceiver module for contactless communication at 13.56 MHz based on the 80C51 microcontroller core. It supports 6 different operating modes:
The PN533 implements a demodulator and decoder for signals from ISO/IEC 14443A/MIFARE compatible cards and transponders. The PN533 handles the complete ISO/IEC 14443A framing and error detection (Parity & CRC).
The PN533 supports MIFARE 1 KB or MIFARE 4 KB emulation products. The PN533 supports contactless communication using MIFARE Higher transfer speeds up to 424 kbit/s in both directions.
The PN533 can demodulate and decode FeliCa coded signals. The PN533 handles the FeliCa framing and error detection. The PN533 supports contactless communication using FeliCa Higher transfer speeds up to 424 kbit/s in both directions.
The PN533 supports layers 2 and 3 of the ISO/IEC 14443 B Reader/Writer communication scheme, except anticollision. This must be implemented in firmware as well as upper layers.
In card emulation mode, the PN533 is able to answer to a Reader/Writer command either according to the FeliCa or ISO/IEC 14443A/MIFARE card interface scheme. The PN533 generates the load modulation signals, either from its transmitter or from the LOADMOD pin driving an external active circuit. A complete secure card functionality is only possible in combination with a secure IC using the NFC-WI/S²C interface.
Compliant to ECMA 340 and ISO/IEC 18092 NFCIP-1 Passive and Active communication modes, the PN533 offers the possibility to communicate to another NFCIP-1 compliant device, at transfer speeds up to 424 kbit/s.The PN533 handles the complete NFCIP-1 framing and error detection.
The PN533 transceiver can be connected to an external antenna for Reader/Writer or Card/PICC modes, without any additional active component.
The PN533 supports the following host interfaces:
PN533 has also a master I²C interface enabling the drive on an I²C peripheral (i.e. memory).
In addition, a power switch is included to supply power to a secure IC.
PN533 Block diagram
Outline 3d SOT618-1
Data Sheets (2)
| Name/Description | Modified Date |
|---|---|
| Near Field Communication (NFC) controller (REV 3.3) PDF (71.0 kB) PN533_SDS | 16 Jul 2012 |
Application Notes (7)
| Name/Description | Modified Date |
|---|---|
| How to build a NFC Application on Android (REV 1.1) PDF (503.0 kB) AN11367 | 28 Sep 2015 |
| AN1425 RF Amplifier for NFC Reader IC's; AN166510 Amplifier antenna matching calculation (Excel) (REV 2.4) ZIP (213.0 kB) AN1425_AN166510 | 02 Aug 2011 |
| AN1445 Antenna design guide for MFRC52x, PN51x, PN53x; AN1444 RF Design Guide including Excel Calculation sheet (REV 1.2) ZIP (1.9 MB) AN1445_AN1444 | 13 Oct 2010 |
| NFC-FRI SDK (NFC Forum Reference Implementation) (REV 1.0) ZIP (8.4 MB) AN10664_1_NFC_FRI_SDK_206810 | 04 Dec 2007 |
Users Guides (1)
| Name/Description | Modified Date |
|---|---|
| PN533 User Manual UM0801-03 (REV 3.0) PDF (2.5 MB) 157830_PN533_UM080103 | 14 Jan 2009 |
Brochures (1)
| Name/Description | Modified Date |
|---|---|
| NXP® Near Field Communication (NFC) controller PN533 (REV 1.2) PDF (268.0 kB) 939775017219 | 08 May 2012 |
Selector Guides (1)
| Name/Description | Modified Date |
|---|---|
| Application guide; Portable devices and mobile handsets (REV 2.0) PDF (15.4 MB) 75017090 | 13 Mar 2012 |
Package Information (1)
| Name/Description | Modified Date |
|---|---|
| plastic thermal enhanced very thin quad flat package; no leads; 40 terminals; body 6 x 6 x 0.85 mm (REV 1.1) PDF (231.0 kB) SOT618-1 | 08 Jun 2016 |
Design Support
- Product Support Package for demokit PN533/C270 (REV 1.5) ZIP PN533_SUPPORTPACKAGE_158315_1 3/7/2013
- PN531, PN532, PN533 Design-in kit (REV 1.0) ZIP 123110_1 5/31/2010
Software
- NXP Generic USB - PN533 device (REV 1.0) ZIP SW304310 9/4/2014
- Installer for Win7: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, PN532 (serial), PN51x (serial): SDK_NFC_HAL_v2.2 including Source code ("C") HAL (Install shield) including MIFARE 1K and P2 (REV 2.2) rar NFCHAL_SDKV22_SETUP_227122 2/1/2012
- Installer fro WIN_XP: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, PN532 (serial), PN51x (serial): SDK_NFC_HAL_v2.2 including Source code ("C") HAL (Install shield) including MIFARE 1K and (REV 2.2) ZIP 123622 8/20/2010
- SCRTester including user manual (REV 1.5) ZIP 141410 5/26/2010
Libraries
- Eagle parts library (REV 1.1) ZIP NXP_RFID_213911 1/3/2012
Ordering Information
| Product | Status | Supported RF standards | RF Output Power [max] | RF driver current [max] (mA) | Contact Interface | RF driver supply (V) | Programmable microcrontroller | Host Interface |
|---|---|---|---|---|---|---|---|---|
| PN5331B3HN/C270 | Active | ISO/IEC 14443A; PCD and PICC modesISO/IEC 14443B; PCD modeISO/IEC 18092; NFC-IP1MIFARE CLASSIC R/W | 300mW | 100.0 | N | N | USB, UART | |
| PN5331B3HN/C271 | No Longer Manufactured | ISO/IEC 14443A; PCD and PICC modesISO/IEC 14443B; PCD modeISO/IEC 18092; NFC-IP1MIFARE CLASSIC R/W | 300mW | 100.0 | N | N | USB, UART |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PN5331B3HN/C270 | | SOT618-1 | Reel 13" Q1/T1 in Drypack | Active | PN5331B3HN/C270,51 (9352 878 68518) | Standard Marking | PN5331B3HN/C270 |    | Always Pb-free | 1 | 2 | |
| Tray, Bakeable, Multiple in Drypack | Active | PN5331B3HN/C270:55 (9352 878 68557) | Standard Marking | PN5331B3HN/C270 | | Always Pb-free | 1 | 2 | ||||
| Tray, Bakeable, Single in Drypack | Active | PN5331B3HN/C270,55 (9352 878 68551) | Standard Marking | PN5331B3HN/C270 | | Always Pb-free | 1 | 2 |
- Near Field Communication (NFC) controller PN5331B3HN
- Near Field Communication (NFC) controller pn5331b3hn
- How to build a NFC Application on Android pn7120
- AN1425 RF Amplifier for NFC Reader IC's; AN166510 Amplifier antenna matching calculation (Excel) pn5331b3hn
- AN1445 Antenna design guide for MFRC52x, PN51x, PN53x; AN1444 RF Design Guide including Excel Calculation sheet pn5331b3hn
- NFC-FRI SDK (NFC Forum Reference Implementation) pn5331b3hn
- PN533 User Manual UM0801-03 pn5331b3hn
- NXP® Near Field Communication (NFC) controller PN533 pn5331b3hn
- Application guide; Portable devices and mobile handsets pesd24vs1ul
- Product Support Package for demokit PN533/C270 PN5331B3HN
- PN531, PN532, PN533 Design-in kit PN5331B3HN
- NXP Generic USB - PN533 device PN5331B3HN
- Installer for Win7: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, PN5 PN5331B3HN
- Installer fro WIN_XP: Windows Hardware Abstraction Layer (HAL) Software Development Kit (SDK) for NXP NFC IC PN531 USB/Serial, P PN5331B3HN
- SCRTester including user manual PN5331B3HN
- Eagle parts library PN5331B3HN
- plastic thermal enhanced very thin quad flat package; no leads; 40 terminals; body 6 x 6 x 0.85 mm TDA18273HN
- TDA18273HN
