TDA8596TH: I2C-bus controlled 4 x 45 W power amplifier with symmetrical inputs
The TDA8596 is a quad Bridge Tied Load (BTL) audio power amplifier with symmetrical inputs, made in BCDMOS technology. It contains four independent amplifier channels in BTL configuration with complementary (PMOST/NMOST) output stages. Temperature warning and output signal clipping diagnosis is possible via the I2C-bus and via the diagnostic pins (DIAG and STB pin). The temperature pre-warning level and clip detection levels can be programmed via the I2C-bus. The status of each amplifier channel (i.e. output offset, load connected or not, short circuit condition at the output pins) can be read out separately.
sot851-2_3d
I2C-bus mode
- DC load detection: open (no load), normal load, line-driver load
- AC load (tweeter) detection
- Detect which load is connected during start-up to allow the system to be configured to select the gain accordingly (e.g. line-driver mode or normal mode).
- Independently selectable soft mute of front (channel 1 and channel 3) and rear channels (channel 2 and channel 4)
- Independently programmable gain (26 dB and 16 dB) of front (channel 1 and channel 3) and rear (channel 2 and channel 4) channels
- Flexible programmable diagnostic levels: Programmable clip detect: 2 %, 5 % or 10 % Programmable thermal pre-warning
- Selectable information on the DIAG or STB pin: The STB pin can be programmed/multiplexed with second clip detection Clip information of each channel separately can be directed to the DIAG pin or the STB pin Independent enabling of thermal-, clip- or load fault (short across the load, to VP orto ground) available on the DIAG pin
- Offset detection
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| I2C-bus controlled 4 x 45 W power amplifier with symmetrical inputs (REV 2.0) PDF (267.0 kB) TDA8596 | 08 Nov 2007 |
Package Information (1)
| Name/Description | Modified Date |
|---|---|
| plastic, heatsink small outline package; 36 leads; low stand-off height (REV 1.0) PDF (738.0 kB) SOT851-2 | 08 Feb 2016 |
Ordering Information
| Product | Status | Package version | Remarks | THD (%) | RMS power (W) | Output power (W) | Gain (dB) | VP | Stereo inputs | S | Voltage | Package material | Amplifier type | Power | Channel configuration | Car audio | Card supply current (Icc) (mA) | Output Impedance (Ohm) | THD % | Switching current (mA) | Switching transistor | Vout1 (VDC) | Vout2 (VDC) | Vout3 (VDC) | Vout4 (VDC) | Vout5 (VDC) | Vout6 (VDC) | Package name | Description |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TDA8596TH/N1S | Active | SOT851-2 | I2C Bus diagnostic | 4 x 25 | 26 | BTL/quad | HSOP36 | ||||||||||||||||||||||
| TDA8596TH/N1 | No Longer Manufactured | SOT851-2 | I2C Bus diagnostic | 4 x 25 | 26 | BTL/quad | HSOP36 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TDA8596TH/N1S | | SOT851-2 | Reel 13" Q1/T1 | Active | TDA8596TH/N1S,118 (9352 914 89118) | Standard Marking | TDA8596TH/N1S |   | 1 | 1 |
