TJA1027: LIN 2.2A/SAE J2602 transceiver _ BDTIC a Leading Distributor in China

TJA1027: LIN 2.2A/SAE J2602 transceiver

The TJA1027 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle sub-networks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. The TJA1027 is pin-compatible with the TJA1020 and the TJA1021.

The transmit data stream generated by the protocol controller is converted by the TJA1027 into an optimized bus signal shaped to minimize ElectroMagnetic Emissions (EME). The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application, an external resistor in series with a diode should be connected between pin VBAT and pin LIN. The receiver detects a receive data stream on the LIN bus input pin and transfers it via pin RXD to the microcontroller.

Power consumption is very low in Sleep mode. However, the TJA1027 can still be woken up via pins LIN and SLP_N.

sot782-1_3d

Very high ElectoMagnetic Immunity (EMI)
Very high ESD robustness: ±8 kV according to IEC 61000-4-2 for pins LIN and VBAT
Bus terminal and battery pin protected against transients in the automotive environment (ISO 7637)
Bus terminal short-circuit proof to battery and ground
Thermally protected
Initial transmit data (TXD) dominant check

Data Sheets (1)

Name/Description	Modified Date
LIN 2.2A/SAE J2602 transceiver (REV 2.0) PDF (522.0 kB) TJA1027	10 Feb 2016

Package Information (2)

Name/Description	Modified Date
plastic thermal enhanced very thin small outline package; no leads; 8 terminals (REV 1.1) PDF (180.0 kB) SOT782-1	14 Jun 2016
plastic small outline package; 8 leads; body width 3.9 mm (REV 1.0) PDF (244.0 kB) SOT96-1	08 Feb 2016

Packing (2)

Name/Description	Modified Date
HVSON8; reel pack; SMD; 13"; standard product orientation Orderable part number ending, 118 or J Ordering code (12NC)... (REV 2.0) PDF (261.0 kB) SOT782-1_118	06 May 2013
SO8; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 2.0) PDF (232.0 kB) SOT96-1_118	19 Apr 2013

Supporting Information (3)

Name/Description	Modified Date
Wave Soldering Profile (REV 1.0) PDF (20.0 kB) WAVE_SOLDERING_PROFILE	30 Sep 2013
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW	08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE	08 Oct 2009

Ordering Information

Product	Category	Product category	Supported standards	Package name	Package version	Low power modes	Supply voltage [min] (V)	Supply voltage [max] (V)	Data rate [min] (kb/s)	Data rate [max] (kb/s)	CAN channels	LIN channels	FlexRay Channels	Voltage on bus pins [min] (V)	Voltage on bus pins [max] (V)	V_ESD IEC61000-4-2 (kV)	V_ESD HBM on bus pins (+/- kV)	VIO option available	T_vj [max] (°C)	R_th(j-a) (K/W)	Under-voltage detection	TX Dominant Time out	Over-temperature detection	INH / Wake Pin	Min High Input Levels (V)	No of pins	Application	Recommended Version

Package Information

Product ID	Outline Version	Reflow/Wave Soldering	Packing	Product Status	Part NumberOrdering code(12NC)	Marking	Chemical Content	LeadFree Conversion Date	MSL	MSL LF
TJA1027T/20	SOT96-1	SO-SOJ-REFLOW SO-SOJ-WAVE SO-SOJ-REFLOW SO-SOJ-WAVE	Reel 13" Q1/T1	Active	TJA1027T/20,118 (9352 942 11118)	Standard Marking	TJA1027T/20	Always Pb-free	1	1
TJA1027T/20/1	SOT96-1	SO-SOJ-REFLOW SO-SOJ-WAVE SO-SOJ-REFLOW SO-SOJ-WAVE	Reel 13" Q1/T1	Active	TJA1027T/20/1J (9353 034 35118)	Standard Marking	TJA1027T/20/1	Always Pb-free	1	1
TJA1027TK/20	SOT782-1		Reel 13" Q1/T1	Active	TJA1027TK/20,118 (9352 942 12118)	Standard Marking	TJA1027TK/20	Always Pb-free	1	1
TJA1027TK/20/1	SOT782-1		Reel 13" Q1/T1	Active	TJA1027TK/20/1J (9353 034 42118)	Standard Marking	TJA1027TK/20/1	Always Pb-free	1	1