TJA1081GTS: FlexRay node transceiver

The TJA1081G is a FlexRay transceiver that is fully compliant with FlexRay electrical physical layer specification ISO 17458-4:2013. It is intended for communication systems from 2.5 Mbit/s to 10 Mbit/s and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network.

The TJA1081G features enhanced low-power modes, optimized for ECUs that are permanently connected to the battery.

The TJA1081G provides differential transmit capability to the network and differential receive capability to the FlexRay controller. It offers excellent EMC performance as well as effective ESD protection.

The TJA1081G actively monitors system performance using dedicated error and status information (that any microcontroller can read), along with internal voltage and temperature monitoring.

The TJA1081G supports mode control as used in the TJA1080A and is fully functionally and pin compatible with the TJA1081B.

Outline 3d SOT338-1
Data Sheets (1)
Name/DescriptionModified Date
FlexRay node transceiver (REV 1.0) PDF (651.0 kB) TJA1081G28 Oct 2016
Package Information (1)
Name/DescriptionModified Date
plastic shrink small outline package; 16 leads; body width 5.3 mm (REV 1.0) PDF (306.0 kB) SOT338-108 Feb 2016
Supporting Information (2)
Name/DescriptionModified Date
Footprint for reflow soldering (REV 1.0) PDF (16.0 kB) SSOP-TSSOP-VSO-REFLOW08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (16.0 kB) SSOP-TSSOP-VSO-WAVE08 Oct 2009
Ordering Information
ProductStatusProduct categorySupported standardsPackage nameLow power modesPackage versionSupply voltage [min] (V)Supply voltage [max] (V)Data rate [min] (kb/s)Data rate [max] (kb/s)FlexRay ChannelsVoltage on bus pins [min] (V)Voltage on bus pins [max] (V)VESD IEC61000-4-2 (kV)VESD HBM on bus pins (+/- kV)VIO option availableApplicationRecommended VersionNo of pins
TJA1081GTSActiveSSOP16SOT338-116