NTS0104UK-Q100: Dual supply translating transceiver; open drain; auto direction sensing
The NTS0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction
sensing, that enables bidirectional voltage level translation. It features two 4-bit
input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A)
and VCC(B)). VCC(A) can be supplied with any voltage between 1.65 V and 3.6 V. VCC(B) can
be supplied with any voltage between 2.3 V and 5.5 V. The range in supply voltages
makes the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V,
3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to
VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance
OFF-state. This device is fully specified for partial power-down applications using IOFF.
The IOFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
Data Sheets (1)
Brochures (2)
Ordering Information
| Product | Status | VCC(A) (V) | VCC(B) (V) | Logic switching levels | Output drive capability (mA) | tpd (ns) | No of bits | Power dissipation considerations | Tamb (Cel) | Rth(j-a) (K/W) | Ψth(j-top) (K/W) | Rth(j-c) (K/W) | Package name |
|---|
| NTS0104UK-Q100 | End of Life | 1.65 - 3.6 | 2.3 - 5.5 | CMOS | -0.02 | 4.4 | 4 | very low | -40~125 | | | | |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | MSL | MSL LF |
|---|
| NTS0104UK-Q100 | | | | | Discontinued | NTS0104UK-Q100Z
(9352 993 22012) | s04 | NTS0104UK-Q100 |    | Always Pb-free | NA | NA |
