AMIS-30600: LIN Transceiver

The single-wire transceiver AMIS-30600 is a monolithic integrated circuit in a SOIC-8 package. It works as an interface between the protocol controller and the physical bus. The AMIS-30600 is especially suited to drive the bus line in LIN systems in automotive and industrial applications. Further it can be used in standard ISO9141 systems. In order to reduce current consumption the AMIS-30600 offers a stand-by mode. A wake-up caused by a message on the bus pulls the INH-output high until the device is switched to normal operation mode. The transceiver is implemented in I2T100 technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip. The AMIS-30600 provides an ultra-safe solution to current automotive in-vehicle networking (IVN) requirements by providing unlimited short circuit protection in the event of a fault condition.

Features
  • Slope control dependant from Vbat
  • Integrated slope control for transmitter
  • Integrated filter and hysteresis for receiver
  • Power down supply current < 50µA
  • Load dump protection (45V)
  • Indefinite short circuit protection to supply and ground
  • Thermal shutdown
  • Transmission rate up to 20 kbaud
  • LIN compliant to specification Rev. 1.3 and Rev. 2.0
Benefits
  • Enables maximum capacitive load
Applications
  • In-Vehicle Networking
  • Industrial Networking
End Products
  • Industrial Equipment
  • Automobiles
Design & Development Tools (1)
Document TitleDocument ID/SizeRevisionRevision Date
AMIS-30600 Design WorksheetAMIS-30600 DWS.XLS (125.0kB)0
Data Sheets (1)
Document TitleDocument ID/SizeRevisionRevision Date
LIN TransceiverAMIS-30600/D (133kB)9
Tutorials (1)
Document TitleDocument ID/SizeRevisionRevision Date
Basics of IVN ProtocolsTND6015/D (1165kB)1Jun, 2014
Package Drawings (1)
Document TitleDocument ID/SizeRevision
SOIC-8751AZ (37.1kB)B
Application Notes (2)
Document TitleDocument ID/SizeRevisionRevision Date
EMC Conducted Susceptibility, IEC 62132-4, Direct Power InjectionAND8410/D (213.0kB)3
Low Power ConsumptionAND8411/D (206.0kB)3
Order Information
ProductStatusCompliancePackageMSL*ContainerBudgetary Price/Unit
AMIS30600LINI1GLast ShipmentsAEC Qualified PPAP Capable Pb-free Halide freeSOIC-8751AZ2Tray JEDEC96
AMIS30600LINI1RGActiveAEC Qualified PPAP Capable Pb-free Halide freeSOIC-8751AZ2Tape and Reel3000Contact BDTIC
Specifications
ProductData Transmission StandardData RateNumber of DriversNumber of ReceiversVCC Min (V)VCC Max (V)tPLH Max (µs)IO Max (µA)IIH Max (mA)
AMIS30600LINI1RGLIN20 kbaud117.31850400000.7
LIN Transceiver (133kB) AMIS-30600
AMIS-30600 Design Worksheet AMIS-30600
Basics of IVN Protocols NCV7441
EMC Conducted Susceptibility, IEC 62132-4, Direct Power Injection AMIS-30600
Low Power Consumption AMIS-30600
SOIC-8 N64S830HA
AMIS-30600