AMIS-42700: CAN Transceiver, Dual, High Speed
Controller area network (CAN) is a serial communication protocol, which supports distributed real-time control and multiplexing with high safety level. Typical applications of CAN-based networks can be found in automotive and industrial environments.The AMIS-42700 Dual CAN transceiver is the interface between up to two physical bus lines and the protocol controller and will be used for serial data interchange between different electronic units at more than one bus line.It can be used for both 12 V and 24 V systems.
Features- Fully compatible with the ISO 118982 standard
- Certified Authentication on CAN Transceiver Conformance (d1.1)
- High speed (up to 1 Mbps in function of the bus topology)
- Ideally suited for 12 V and 24 V industrial and automotiveapplications
- Low EME commonmodechoke is no longer required
- Differential receiver with wide commonmode range (±35 V) forhigh EMS
- No disturbance of the bus lines with an unpowered node
- Dominant timeout function
- Thermal protection
- Bus pins protected against transients in an automotive environment
- Short circuit proof to supply voltage and ground
|
Applications- In-Vehicle Networking
- Industrial Networking
| End Products- Automobiles
- Industrial Equipment
|
Design & Development Tools (1)
Data Sheets (1)
Tutorials (1)
Package Drawings (1)
Application Notes (11)
Order Information
| Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
|---|
| AMIS42700WCGA4H | Last Shipments | AEC Qualified
PPAP Capable
Pb-free
Halide free | SOIC-20W | 751AQ | 2 | Tray JEDEC | 38 | |
| AMIS42700WCGA4RH | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | SOIC-20W | 751AQ | 2 | Tape and Reel | 1500 | Contact BDTIC |
Specifications
| Product | Data Transmission Standard | Data Rate | Number of Drivers | Number of Receivers | VCC Min (V) | VCC Max (V) | tPLH Max (µs) | IO Max (µA) | IIH Max (mA) |
|---|
| AMIS42700WCGA4RH | CAN | 1 Mb/s | 2 | 2 | -0.3 | 7 | | | |
