ASM3P2853A: Peak EMI Reducing Solution
The ASM3P2853A is a versatile spread spectrum frequency modulator. The ASM3P2853A reduces electromagnetic interference (EMI) at the clock source. The ASM3P2853A allows significant system cost savings by reducing the number of circuit board layers and shielding that are required to pass EMI regulations. The ASM3P2853A modulates the output of PLL in order to spread the bandwidth of a synthesized clock, thereby decreasing the peak amplitudes of its harmonics. This results in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and most clock generators. Lowering EMI by increasing a signal's bandwidth is called spread spectrum clock generation.
Features- Generates an EMI optimized clock signal at output
- Spread Spectrum ON/OFF control
|
Applications- EMI management for high speed digital applications
| End Products- PC peripheral devices
- Consumer electronics
- Embedded controller systems
|
Application Notes (1)
Package Drawings (1)
Data Sheets (1)
Order Information
| Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
|---|
| ASM3P2853AG-08SR | Active | Pb-free
Halide free | SOIC-8 | 751-07 | 1 | Tape and Reel | 2500 | Contact BDTIC |
Specifications
| Product | VDD Typ (V) | fin Typ (MHz) | fout Typ (MHz) | Deviation Type | Features | TA Min (°C) | TA Max (°C) |
|---|
| ASM3P2853AG-08SR | 2.5 | 25 | 50
48 | ±1 | | 0 | 70 |
