CAT4004: LED Driver, Constant Current, 4-Channel, with EZDim™
The CAT4004 provides four matched low dropout current sources to drive LEDs. An external resistor on RSET sets the current in the LED channels. Each LED channel includes an individual control loop allowing the device to handle a wide range of LED forward voltages while still maintaining tight current matching. The EN/DIM logic inputs supports device enable and a digital dimming interface for current setting of all LEDs. Six different current dimming ratios are available. The device is aimed at 'direct drive' battery applications. It is required that the battery or voltage source have enough headroom to drive the LED forward voltage and current sink (>150 mV).
Features- Four LED current sinks with tight matching
- Low Dropout Driver 130 mV at 30 mA
- No switching noise
- Shutdown current < 1μA
- LED current set by external resistor
- Dimming via 1-wire EZDim™ interface
- Thermal shutdown protection
|
Applications | End Products- Mobile Phones
- Digital Still Cameras
|
Data Sheets (1)
Package Drawings (1)
Order Information
| Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
|---|
| CAT4004VP2-GT3 | Active | Pb-free
Halide free | TDFN-8 | 511AK | 1 | Tape and Reel | 3000 | $0.52 |
| CAT4004VP2-T3 | Consult Sales Office | Pb-free
Halide free | TDFN-8 | 511AK | 1 | Tape and Reel | 3000 | |
Specifications
| Product | VI Max (V) | IO Max (mA) | LEDs in Series, Max # | LEDs in Parallel, Max # |
|---|
| CAT4004VP2-GT3 | 5.5 | 100 | 4 | 4 |
