MC100EP16F: Differential Driver / Receiver With Reduced Output Swing
The MC100EP16F is a differential receiver/driver. The device is functionally equivalent to the EP16 device with higher performance capabilities. With reduced output swings, rise/fall transition times are significantly faster than on the EP16. The EP16F is ideally suited for interfacing with high frequency sources.The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.
Features- 100 ps Typical Rise and Fall Time
- Max Frequency >4 GHz
- PECL Mode Operating Range: VCC= 3.0 V to 5.5 V with VEE = 0 V
- NECL Mode Operating Range: VCC= 0V with VEE = -3.0 V to -5.5 V
- Open Input Default State
- Safety Clamp on Inputs
|
Application Notes (16)
Data Sheets (1)
Simulation Models (3)
Package Drawings (2)
Order Information
Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
---|
MC100EP16FDG | Active | Pb-free
Halide free | SOIC-8 | 751-07 | 1 | Tube | 98 | Contact BDTIC |
MC100EP16FDR2G | Lifetime | Pb-free
Halide free | SOIC-8 | 751-07 | 1 | Tape and Reel | 2500 | |
MC100EP16FDTG | Active | Pb-free
Halide free | TSSOP-8 | 948R-02 | 3 | Tube | 100 | Contact BDTIC |
MC100EP16FDTR2G | Lifetime | Pb-free
Halide free | TSSOP-8 | 948R-02 | 3 | Tape and Reel | 2500 | |
Specifications
Product | Type | Channels | Input / Output Ratio | Input Level | Output Level | VCC Typ (V) | tJitterRMS Typ (ps) | tskew(o-o) Max (ps) | tpd Typ (ns) | tR & tF Max (ps) | fmaxClock Typ (MHz) | fmaxData Typ (Mbps) |
---|
MC100EP16FDG | Signal Driver | 1 | 1:1 | CML
ECL | RSECL | 3.3
5 | 0.2 | 20 | 0.22 | 110 | 4000 | |
MC100EP16FDTG | Signal Driver | 1 | 1:1 | CML
ECL | RSECL | 5
3.3 | 0.2 | 20 | 0.22 | 110 | 4000 | |