NCL30100: LED Driver Controller, Fixed, Off Time, Switch Mode
The NCL30100 is a compact switching regulator controller intended for space constrained constant current high brightness LED driver applications where high efficiency and small size are important. The controller is based on a peak current, quasi fixed off time control architecture optimized for continuous conduction mode stepdown (buck) operation. This allows the output filter capacitor to be eliminated. In this configuration, a reverse buck topology is used to control a cost effective N-channel MOSFET.
Features- Quasi-Fixed Off Time, Peak Current Control Method
- Reverse Buck Switching Topology
- Up to 700 kHz Switching Frequency
- Up to 95%+ Efficiency
- No Output Capacitor Needed
- Vcc Operation from 6.35-18 V
- -40 to 125 °C
| Benefits- No Loop Compensation Needed
- N-FET MOSFETs can be used
- Allows smaller inductors
|
Applications- Low Voltage Halogen LED Replacement (MR-16)
- LED Light Bars
- LED Track Lighting
- Landscape Lighting
- Transportation Lighting
- Outdoor Area Lighting
| End Products- LED Based General Lighting
- LED Channel Lettering
|
Design & Development Tools (1)
Data Sheets (1)
Evaluation Board Documents (8)
Package Drawings (1)
| Document Title | Document ID/Size | Revision |
|---|
| TSOP-6 | 318G-02 (64.1kB) | V |
Evaluation/Development Tool Information
| Product | Status | Compliance | Short Description |
|---|
| NCL30100ADLMGEVB | Active | Pb-free | Compact Switching Buck LED Driver Evaluation Board |
| NCL30100ASLDGEVB | Active | Pb-free | Dimmable LED Demonstration Board Evaluation Board |
Order Information
| Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
|---|
| NCL30100SNT1G | Active | Pb-free
Halide free | TSOP-6 | 318G-02 | 1 | Tape and Reel | 3000 | $0.5 |
Specifications
| Product | Topology | VI Min (V) | VI Max (V) | VO Max (V) | IO Max (mA) | fSW Typ (kHz) |
|---|
| NCL30100SNT1G
Design it | Step-Down | 6.65 | 18 | | 1200 | Up to 700 |
