White LED Driver for large LCD Panels (DCDC Converter type) - BD93941FP
BD93941FP is a high efficiency driver for white LEDs and designed for large LCDs. These ICs are built-in a boost DCDC converters that employ an array of LEDs as the light source. BD93941FP has some protect function against fault conditions, such as the over-voltage protection (OVP), the over current limit protection of DCDC (OCP), the short circuit protection (SCP), the open detection of LED string. Therefore BD93941FP is available for the fail-safe design over a wide range output voltage.
| Part Number | Status | Package | Unit Quantity | Minimum Package Quantity | Packing Type | RoHS |
|---|
|
| BD93941FP-E2 | Active | HSOP20 | 2000 | 2000 | Taping | Yes |
BD93941FP Data Sheet
Specifications| Topology | Boost | | Number of Outputs | 4 | | Vin(Min.)[V] | 9.0 | | Vin(Max.)[V] | 35.0 | | Output Current(Max.)[mA] | 200.0 | | Frequency(Max.)[MHz] | 0.15 | | Dimming | PWM | | Operating Temperature (Min.)[°C] | -40 | | Operating Temperature (Max.)[°C] | 85 |
| Technical DocumentsFeatures- 4ch LED constant current driver and DC/DC converter
- Maximum LED Current: 200mA
- LED Feedback Voltage: 0.37V (@ADIM=2.5V)so lower heat. Adjustable Feed Back Voltage by following LED Current setting.
- ±2% LED current accuracy (ADIM=2.5V, when each LED is set to 100mA)
- Analog current (Linear) dimming at ADIM pin
- LED pin rating 60V
- Individual detection and individual LED OFF for both open and short circuits
- Built-in ISET pin short-circuit protection circuit
- Set Soft-Start time by external capacitor.
- FET’s Gate (N pin) is driven by 5.8V swing
- Built-in Vout discharge circuit for shutdown
- Built-in Vout overvoltage protection (OVP) / reduced voltage protection (SCP) circuit
|
Related Product
