Ultra-Small, Digital Synchronous Buck Controller with Adjustable Load-Line, Auto-Control® & SMBus™/PMBus™ - PV3105
The PV3105 is a digital synchronous buck controller with adaptive loop compensation, for point-of-load (POL) applications. The output can supply 0.6 V to 5.5 V, and can be configured and controlled via PMBus, with a single resistor, or through programming stored in the non-volatile memory (NVM). With Powervation’s Digital Stress Share (DSS) and PLL synchronization, multiple PV3105 devices may be used in parallel to increase the number of phases supporting the application’s load. PV3105 uses Powervation’s proprietary adaptive digital control loop, Auto-Control, which adapts on a cycle-by-cycle basis, and provides active loop compensation to stabilize the control loop. The digital functionality of this VR controller allows system telemetry (remote measurement and reporting) of current, voltage, and temperature information through its serial interface. Additionally, to maximize system performance and reliability, the IC provides temperature correction/compensation of several parameters. PV3105 is a fully protected DC/DC solution that utilizes analog and digital functionality to maximize protection of the system.
PV3105 。
Part Number | Status | Package | Unit Quantity | Minimum Package Quantity | Packing Type | RoHS |
---|
|
PV3105 | Active | UQFN28V4040V | 2500 | 2500 | Taping | Yes |
PV3105 Data Sheet
SpecificationsPhase Count | 1 | QFN Package | 4 mm x 4 mm | Supply Voltage | 0.6 V to 5.5 V | Controller Biad | 3.3 | Interface SMBus | PMBus™ Compliant | Interface SVID | N/A | Interface Parallel VID | N/A | Auto-Compensation | Auto-Control®: Real-Time Adaptive Auto-Tuning | Programmable Fsw | 375 kHz - 1.25 MHz | Phase Add/Drop | N/A | DSS® | Yes | Single Pin CONFIG™ | 8 Tables | VSET | Yes | VTRACK | Yes | ADDR | Yes | System Good | Yes | Sensors / Precision Telemetry Voltage | VOUT, VIN | Sensors / Precision Telemetry Current | IOUT | Sensors / Precision Telemetry Power | EOUT | Sensors / Precision Telemetry Tsense Supported | Internal Die Sense & External | Fault Response OVP | Restart / Latching | Fault Response OCP | Restart / Latching | Fault Response SCP | Restart / Latching | Fault Response LOS | N/A | Fault Response OTP | Restart / Latching | Fault Response Phase Loss | N/A | SCP Temp Compensation | Yes | Support NTC Sensor | Yes | Configurable SALRT | Yes | Programmable Load-Line | Yes | Integrator Gain Scalar | Yes | Operating Temperature (Min.)[°C] | -25 | Operating Temperature (Max.)[°C] | 85 |
| |
Related Product