ST3243EB:15 kV ESD PROTECTED 3 TO 5.5 V, 400 kbps, RS-232 TRANSCEIVER WITH AUTO POWER-DOWN, [-40oC, 85oC] TEMPERATURE RANGE

The ST3243E device consists of 3 drivers, 5 receivers and a dual charge-pump circuit. The device meets the requirements of EIA/TIA and V.28/V.24 communication standards providing high data rate capability and enhanced electrostatic discharge (ESD) protection. All transmitter outputs and receiver input are protected to ±8 kV USING IEC 1000-4-2 contact discharge and ±15 kV using the human body model. The receiver R2 is always active to implement a wake-up feature for serial port.

The ST3243E has a proprietary low-dropout transmitter output stage enabling true RS-232 performance from a 3.0 V to 5.5 V supply with a dual charge pump. The device is guaranteed to run at data rates of 250kbps while maintaining RS-232 output levels.

The auto-powerdown feature functions when FORCEON is low and FORCEOFF is high. During this mode of operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFF is set low, both drivers and receivers (expert R2B) are shut off, and supply current is reduced to 1 µA.

Disconnecting the serial port or turning off the peripheral drives causes the auto power-down condition to occur.

Auto power-down can be disabled when FORCEON and FORCEOFF are high, and should be done when driving a serial mouse. With auto power-down enabled, the device is activated automatically when a valid signal is applied to any receiver input.

Typical application are in notebook, subnotebook, palmtop computers, battery-powered equipment, hand-held equipment, peripherals and printers.

Key Features

  • Meet EIA/TIA-232 specifications down to 3 V
  • 0.1 µF external capacitors
  • ESD protection for RS-232 I/O pins: ±8 kV IEC 1000-4-2 contact discharge ±15 kV human body model
  • 250 Kbps minimum guaranteed data rate
  • 1 µA supply current achieved when in auto power-down
  • Guaranteed mouse drive ability
  • Available in SO-28, SSOP-28, TSSOP28 and flip-chip28 packages
  • Guaranteed 6 V/ms slew rate range
Product Specifications
DescriptionVersionSize
DS2695: ± 15 kV ESD protected 3 to 5.5 V, 400 kbps, RS-232 transceiver with auto power-down12.1627 KB
Brochures
DescriptionVersionSize
Products and Solutions for Factory Automation and Control1.03 MB
Sample & Buy
Part NumberPackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
ST3243EBTRTSSOP28 9.7 x 4.4Tape And Reel-40851.311000NECEAR99MALAYSIA
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
ST3243EBTRTSSOP28 9.7 x 4.4IndustrialEcopack3md_ym-wspc-tssop-wspc-28-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_e1ym-wspc-uf46jc5_vers2_sdm_signed.pdf
md_ym-wspc-tssop-wspc-28-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_e1ym-wspc-uf46jc5_vers2.xml
± 15 kV ESD protected 3 to 5.5 V, 400 kbps, RS-232 transceiver with auto power-down ST3243EC
STEVAL-SPIMD20V1 demonstration kit based on the SPIMD20 integrated motor drive STEVAL-SPIMD20V1
md_ym-wspc-tssop-wspc-28-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_e1ym-wspc-uf46jc5_vers2_sdm_signed.pdf ST3243EB
md_ym-wspc-tssop-wspc-28-wspc-body-wspc-4.4-wspc-pitch-wspc-0.65_e1ym-wspc-uf46jc5_vers2.xml ST3243EB