• 简体中文
• English

STNRG288A：Digital controller for power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL

STNRG devices are a part of the STNRG family of STMicroelectronics^® digital devices designed for advanced power conversion applications.

The STNRG improves the design of the successful STLUX™ family, now integrated in a wide range of LED driver architectures, to support industrial power conversion applications such as PFC+LLC, interleaved LC DC/DC, interleaved PFC for smart power supplies as well as the full bridge for pilot line drivers for electric vehicles.

Key Features

• Up to 6 programmable PWM generators (SMED - “State Machine Event Driven”)
  • 10 ns event detection and reaction
  • Max.1.3 ns PWM resolution
  • Single, coupled and two coupled operational modes
  • Up to 3 internal/external events per SMED
• 4 analog comparators
  • 4 internal 4-bit references
  • Up to 4 external references
  • Less than 50 ns propagation time
  • Continuous comparison cycle
  • Configurable hysteresis voltage levels
• ADCs (up to 8 channels)
  • 10-bit precision, with operational amplifier to extend resolution to 12-bit equivalent
  • Sequencer functionality
  • Input impedance: 1 MΩ
  • Configurable gain value: x1 and x4
• Integrated microcontroller
  • Advanced STM8® core with Harvard architecture and 3-stage pipeline
  • Max. fCPU : 16 MHz
• Memories
  • Flash and E2 PROM with read while write (RWW) and error correction code (ECC)
  • Program memory: 32 Kbytes Flash; data retention 15 years at 85 °C after 10 kcycles at 25 °C
  • Data memory: 1 Kbyte true data E2 PROM; data retention:15 years at 85 °C after 100 kcycles at 85 °C
  • RAM: 6 Kbytes
• Clock management
  • Internal 96 MHz PLL
  • Low power oscillator circuit for external crystal resonator or direct clock input
  • Internal, user-trimmable 16 MHz RC and low power 153.6 kHz RC oscillators
  • Clock security system with clock monitor
• Basic peripherals
  • System, auxiliary and basic timers
  • IWDG/WWDG watchdog, AWU, ITC
• Reset and supply management
  • Multiple low power modes (wait, slow, auto- wakeup, Halt) with user definable clock gating
  • Low consumption power-on and power- down reset
• I/O
  • Multifunction bidirectional GPIO with highly robust design, immune against current injection
  • Fast digital input DIGIN, with configurable pull-up
• Communication interfaces
  • UART asynchronous with SW flow control and bootloader support
  • I2 C master/slave fast-slow speed rate
• Operating temperature: -40 °C up to 105 °C.

Product Specifications

Application Notes

User Manuals

Reference Manuals

Presentations

Brochures

Hardware Development Tools

Software Development Tools

Solution Evaluation Tools

Sample & Buy

Quality & Reliability