VIPER26:VIPerPlus family: Energy saving 12W high voltage converter with direct feedback

The device is an off-line converter with an 800 V avalanche ruggedness power section, a PWM controller, user defined overcurrent limit, protection against feedback network disconnection, hysteretic thermal protection, soft start up and safe auto restart after any fault condition.

Advance frequency jittering reduces EMI filter cost. Burst mode operation and the devices very low consumption both help to meet the standard set by energy saving regulations.

Key Features

  • 800 V avalanche rugged power section
  • PWM operation with frequency jittering for low EMI
  • Operating frequency:
    • 60 kHz for L type
    • 115 kHz for H type
  • Standby power < 50 mW at 265 VAC
  • Limiting current with adjustable set point
  • On-board soft-start
  • Safe auto-restart after a fault condition
  • Hysteretic thermal shutdown
Product Specifications
DescriptionVersionSize
DS6901: Fixed frequency VIPer™ plus family2.1806 KB
Application Notes
DescriptionVersionSize
AN4106: EVLVIP26L-12WFN: 12 V/12 W, 60 kHz non-isolated flyback1.03 MB
AN4564: Is a positive power supply mandatory for my application, or could a negative output work also?1.0384 KB
User Manuals
DescriptionVersionSize
UM0984: STEVAL-ISA081V1 demonstration board based on a 12 V / 1 A isolated flyback2.01 MB
Design Notes & Tips
DescriptionVersionSize
DT0036: Improving voltage regulation of a buck converter using the VIPerPLUS1.0356 KB
HW Model & CAD Libraries
DescriptionVersionSize
VIPer26 PSpice models2.0249 KB
Presentations
DescriptionVersionSize
ST products and solutions for solar energy5.12 MB
VIPerx6 family1.01 MB
Brochures
DescriptionVersionSize
Brochure Power management guide05.20164 MB
VIPerPlus - Your SMPS design deserves a Plus11.20161 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
STEVAL-ISA081V112 V /1 A SMPS wide range demonstration board based on the VIPER26
STEVAL-ISA110V112 V/12 W wide range non-isolated flyback based on the VIPER26LN
STEVAL-ISA111V1Wide range single output demonstration board based on the VIPER26HN
STEVAL-ISA116V1ST5 W, 2-output wide-range buck converter based on the VIPER26LD
Sample & Buy
Part NumberPackagePacking TypeUnit Price (US$) *QuantityRDS(on) (Ω) (max)Transistor Breakdown Voltage (V) (min)Drain Current (A) (nom)ECCN (EU)ECCN (US)Country of Origin
VIPER26LNPDIP 7Tube0.504100078000.7NECEAR99MALAYSIA
VIPER26LDSO-16Tube0.513100078000.7NECEAR99CHINA
VIPER26HNPDIP 7Tube0.504100078000.7NECEAR99MALAYSIA
VIPER26LDTRSO-16Tape And Reel0.513100078000.7NECEAR99CHINA
VIPER26HDSO-16Tube0.525100078000.7NECEAR99CHINA
VIPER26HDTRSO-16Tape And Reel0.525100078000.7NECEAR99CHINA
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
VIPER26LNPDIP 7IndustrialEcopack2
VIPER26LDSO-16IndustrialEcopack2md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_bsq7mt13abx-wspc-(viper26ldtr)-wspc-wcp-wspc-rev-wspc-2_signed.pdf
md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_bsq7mt13abx-wspc-(viper26ldtr)-wspc-wcp-wspc-rev-wspc-2.xml
VIPER26HNPDIP 7IndustrialEcopack2
VIPER26LDTRSO-16IndustrialEcopack2md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_bsq7mt13abx-wspc-(viper26ldtr)-wspc-wcp-wspc-rev-wspc-2_signed.pdf
md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_bsq7mt13abx-wspc-(viper26ldtr)-wspc-wcp-wspc-rev-wspc-2.xml
VIPER26HDSO-16IndustrialEcopack2md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_asq7mt13abx-wspc-(viper26hdtr)-wspc-wcp-wspc-rev-wspc-2_signed.pdf
md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_asq7mt13abx-wspc-(viper26hdtr)-wspc-wcp-wspc-rev-wspc-2.xml
VIPER26HDTRSO-16IndustrialEcopack2
Fixed frequency VIPer™ plus family VIPER26
circuit_diagram_17736_thumbnail.png VIPER26
EVLVIP26L-12WFN: 12 V/12 W, 60 kHz non-isolated flyback VIPER26
Is a positive power supply mandatory for my application, or could a negative output work also? VIPER16
STEVAL-ISA081V1 demonstration board based on a 12 V / 1 A isolated flyback STEVAL-ISA081V1
Improving voltage regulation of a buck converter using the VIPerPLUS VIPER16
Improving voltage regulation of a buck converter using the VIPerPLUS VIPER26
STEVAL-ISV006V2: solar battery charger using the SPV1040 STEVAL-ISV006V2
Improving voltage regulation of a buck converter using the VIPerPLUS VIPER16
Very low drop voltage regulators with inhibit KFXX
Improving voltage regulation of a buck converter using the VIPerPLUS VIPER16
md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_bsq7mt13abx-wspc-(viper26ldtr)-wspc-wcp-wspc-rev-wspc-2_signed.pdf VIPER26
md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_bsq7mt13abx-wspc-(viper26ldtr)-wspc-wcp-wspc-rev-wspc-2.xml VIPER26
md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_asq7mt13abx-wspc-(viper26hdtr)-wspc-wcp-wspc-rev-wspc-2_signed.pdf VIPER26
md_q7-wspc-so-wspc-16-wspc-.15-wspc-to-wspc-jedec-wspc-ms-012_asq7mt13abx-wspc-(viper26hdtr)-wspc-wcp-wspc-rev-wspc-2.xml VIPER26