VN5772AK-E:Quad smart power solid state relay for complete H-bridge configurations

The VN5772AK-E is a device formed by three monolithic chips housed in a standard SO-28 package: a double high-side and two low-side switches. The double high-side is made using STMicroelectronics®VIPower®M0-5 technology, while the low-side switches are fully protected VIPower M0-5 OMNIFET III. This device is suitable to drive a DC motor in a bridge configuration as well as to be used as a quad switch for any low-voltage application. The dual high-side switches integrate built-in non latching thermal shutdown with thermal hysteresis. An output current limiter protects the device in overload conditions. In the case of long overload duration, the device limits the dissipated power to a safe level-up to thermal shutdown intervention. An analog current sense pin delivers a current proportional to the load current (according to a known ratio) and indicates overtemperature shutdown of the relevant high-side switch through a voltage flag.The low-side switches have built-in non latching thermal shutdown with thermal hysteresis, linear current limitation and overvoltage clamping. In case of long overload duration, the low-side switches limit the dissipated power to a safe level up to the thermal shutdown intervention. Fault feedback for overtemperature shutdown of the low-side switch is indicated by the relevant status pin.

Key Features

  • General features
    • Inrush current management by active power limitation on the high-side switches
    • Very low standby current
    • Very low electromagnetic susceptibility
    • Compliant with European directive 2002/95/EC
  • Protections
    • High-side drivers under voltage shutdown
    • Overvoltage clamp
    • Output current limitation
    • High and low-side overtemperature shutdown
    • Short-circuit protection
    • ESD protection
  • Diagnostic functions
    • Proportional load current sense
    • Thermal shutdown indication on both the high and low-side switches
Product Specifications
DescriptionVersionSize
DS6420: Quad smart power solid-state relay for complete H-bridge configurations7.01010 KB
Application Notes
DescriptionVersionSize
AN4892: VIPower M0-5 H-bridges - hardware design guide2.02 MB
Selection Guides
DescriptionVersionSize
Smart power solutions for car body applications3.01 MB
Sample & Buy
Part NumberPackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
VN5772AK-ESO-28Tube-401502.2331000NECEAR99MALAYSIA
VN5772AKTR-ESO-28Tape And Reel-401502.2331000NECEAR99MALAYSIA
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
VN5772AK-ESO-28AutomotiveEcopack1md_lr-wspc-so-wspc-28-wspc-.30-wspc-to-wspc-jedec-wspc-ms-013ae_amlrvh19bfc.pdf
md_lr-wspc-so-wspc-28-wspc-.30-wspc-to-wspc-jedec-wspc-ms-013ae_amlrvh19bfc.xml
VN5772AKTR-ESO-28AutomotiveEcopack1md_lr-wspc-so-wspc-28-wspc-.30-wspc-to-wspc-jedec-wspc-ms-013ae_amlrvh19bfc.pdf
md_lr-wspc-so-wspc-28-wspc-.30-wspc-to-wspc-jedec-wspc-ms-013ae_amlrvh19bfc.xml
Quad smart power solid-state relay for complete H-bridge configurations VN5772AK-E
circuit_diagram_16084_thumbnail.png VN5772AK-E
VIPower M0-5 H-bridges - hardware design guide VN5770AKP-E
Door actuator driver L9950XP
md_lr-wspc-so-wspc-28-wspc-.30-wspc-to-wspc-jedec-wspc-ms-013ae_amlrvh19bfc.pdf VN5772AK-E
md_lr-wspc-so-wspc-28-wspc-.30-wspc-to-wspc-jedec-wspc-ms-013ae_amlrvh19bfc.xml VN5772AK-E